SciELO - Scientific Electronic Library Online

 
vol.16 número2Diseño Mc. Lean-Anderson aplicado para obtener recubrimientos de electrodos aleados con carbono, cromo y titanioSistema Basado en Casos para el diseño de engranajes cilíndricos con contacto exterior índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

BERNAL-AGUILAR, Yudieski et al. Control of critical parameters for square cup deep drawing of AISI 304 DDQ using genetic algorithm. Ingeniería Mecánica [online]. 2013, vol.16, n.2, pp. 144-151. ISSN 1815-5944.

The main purpose of this work is to develop an intellectualized control technique on the deep drawing of square cup made of AISI 304 DDQ stainless steel using genetic algorithm. These control methods are employed in order to investigate the most significant parameters in sheet metal forming process such as drawing force, with a view of optimizing these parameters. The genetic algorithm is used for the optimization purpose to minimize the force of the deep drawing process and to investigate the roles of other parameters as blank holder force. Experimental results show that these combinations of control system can cover a wide range of both materials and influential forming parameters automatically. The results further confirm that the developed system is effective and valid alternative for quick responsible control system with high flexibility.

Palabras clave : intelligent control; deep drawing; genetic algorithm; sheet metal forming.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License