SciELO - Scientific Electronic Library Online

 
vol.57 número4Presencia del síndrome de Burnout en estomatólogosLesiones cariosas en niños con discapacidad de 0-12 años en una población peruana índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Cubana de Estomatología

versión On-line ISSN 1561-297X

Resumen

DE ALENCAR VASCONCELOS, Juliano et al. Accuracy of implant impression using a multifunctional guide in the All-on-Four treatment concept. Rev Cubana Estomatol [online]. 2020, vol.57, n.4  Epub 04-Sep-2020. ISSN 1561-297X.

Introduction:

The passivity of prosthetic components is one of the most important prerequisites in oral implant rehabilitation for maintenance of osseointegration.

Objective:

Thus, the present study analyzed in vitro the accuracy of different molding techniques in prosthetic rehabilitation on angled implants installed in an anatomical model of a metallic edentulous maxilla.

Methods:

Laboratory experiment study. A reference metal model of an edentulous maxilla was used. A metal framework was used for the misadaptation assessment. Three groups (n= 10) were compared and impressions were made with vinyl-polysiloxane and casts were obtained with type IV stone: (1) Impression with a metallic open-tray without splinted transfers; (2) Impression with a metallic open-tray and metal splinted transfers; (3) Impression with a multifunctional guide and metal splinted transfers. Misadaptation was assessed with the aid of a stereomicroscope and measuring software. Data were submitted to ANOVA with Welch correction and the Games-Howell post-hoc test with the significance set at 5 %.

Results:

Misadaptation (µm) was 110,23 ± 30,94, 37,53 ± 3,92, and 37,69 ± 2,79 for the the groups. Statistically significant differences between impression with a metallic open-tray with and without splinted transfers were observed (p < 0,001). No significant differences between the other types of impression.

Conclusions:

Impression with a metallic open-tray without splinted transfers and with a multifunctional guide splinted with metal transfers were the most precise methods resulting in higher accuracy in transferred implants.

Palabras clave : dental implants; dental impression technique; dental materials; dental impression materials.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )