Mi SciELO
Servicios Personalizados
Articulo
Indicadores
Citado por SciELO
Links relacionados
Similares en SciELO
Compartir
Minería y Geología
versión On-line ISSN 1993-8012
Resumen
REYES-CARCASES, Dennis; FERNANDEZ-COLUMBIE, Tomás; ALCANTARA-BORGES, Dayanis y RODRIGUEZ-GONZALEZ, Isnel. Welding with coated electrodes E 6010 and E 7018 in AISI 1025 steel. Min. Geol. [online]. 2018, vol.34, n.1, pp. 112-125. ISSN 1993-8012.
The welding of steel of low carbon content is a common practice in the nickel industry, where components with steels of these characteristics are manufactured. The objective of the paper was to establish the microstructural behavior of the AISI 1025 steel when it was welded with two types of electrodes (E 6010 and E 7018), the first one deposited as a mattress, and the second one to guarantee mechanical resistance; they were made in a 240 x 240 x 10 mm plate with simple bevel preparation. The microstructures obtained with the electrode E 6010 are of the ferrite type Widmanstátten, columnar ferrite and intergranular pearlite, with a hardness of 345 HV, while with the electrode E 7018 the microstructures are ferrite Widmanstátten, austenite and martensite, with hardness of 332 HV. The decrease in hardness in the latter case is associated with the thermal treatment of multipass annealing.
Palabras clave : welding; low carbon steel; E 6010 electrode; E 7018 electrode; microstructure.