SciELO - Scientific Electronic Library Online

 
vol.34 número4Precipitación de níquel en reactor tubular flujo pistónCausa de falla de un codo de acero inoxidable 316 en un circuito de enfriamiento de un reactor índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Minería y Geología

versión On-line ISSN 1993-8012

Resumen

CHANG-CARDONA, Antonio Ramón; MERENCIO-GUEVARA, Pedro Luis  y  GUERRA-GONZALEZ, Yosbel. Specific aeration speed in the leaching of the Caron process: results on an industrial scale. Min. Geol. [online]. 2018, vol.34, n.4, pp. 440-455. ISSN 1993-8012.

The major objective of this study is to analyze the leachate trends of nickel (Ni) and cobalt (Co) with their increase when the specific speed of aeration increases (new parameter Qa). An experimental work was carried out on a scale of a Production demonstration Unit at Punta Gorda Leaching Plant. For the experimental conditions, an operational implementation methodology of the Qa parameter is established in m³ / (t.min); the graphical trends of the leachates and their increases decrease when increasing Qa. The results of the even correlation coefficients of leachate levels of Ni and Copper show that both increase when the proportion of the -R (NH3 / CO2) values also increase the mineral number and the NH3 concentration, while decreasing when the mass flows -R (L / S) and the Qa increase in the contact tanks of the reduced ore with the liquor.

Palabras clave : specific aeration speed; CARON process; carbonate-ammoniacal leaching; residence time.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License