SciELO - Scientific Electronic Library Online

 
vol.18 número2Fabricación de compuesto de matriz epoxi reforzado con fibras largas de henequén orientadas aleatoriamente índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

MORALES-SALAS, Joel; MORENO-FIGUEREDO, Conrado  y  MARIO-PFANN, Johannes. Model to design and simulate renewables energy systems to hot water to two temperature level. Ingeniería Mecánica [online]. 2015, vol.18, n.2, pp. 129-138. ISSN 1815-5944.

For the investigation paper was carried out a model for the design and simulation of renewable energy systems to produce hot water for different temperatures of use, of low level, until 60 ºC, and medium level, until 100 ºC, in isolated zone of electric grid. The proposed model carries out simulations to different configurations of energy system to determine which the most appropriate. The final design and different simulations of two case studies for energy demand was obtained, and the results achieved are analyzed.

Palabras clave : model; design; simulate; renewable energy system; hot water.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License