SciELO - Scientific Electronic Library Online

 
vol.21 número3Diseño y fabricación de un equipo para medir adherencia por rayado índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

GUTIERREZ-GUALOTUNA, Eduardo Roberto; ARZOLA-RUIZ, José  y  ALMEIDA-MERA, Juan Carlos. Modeling for the operation of the firewood gasification in downdraft installations. Ingeniería Mecánica [online]. 2018, vol.21, n.3, pp. 117-123. ISSN 1815-5944.

Optimal operation of energetic installations must considerably influence on its efficiency. By this, the objective of the present paper consists in the definition of the required models structure for the operation of downdraft gasifiers and its identification based on systemic analysis, it identification and the determination of the better adjustment type of model. For the models identification an experimental installation was constructed using, between other biomasses, firewood. Starting from an 3N experimental plan, with three replicas, needed models were identified helped by artificial neural networks and regression techniques. The best results were obtained using neural network, being therefore the most advisable in the preliminary stage of the process of the adaptive construction of operation models of the studied process.

Palabras clave : operation of technological processes; systems analysis; renewable energy sources; artificial neural networks; non-lineal regression.

        · resumen en Español     · texto en Español     · Español ( pdf )