Resumen

PUPILLO, Gaia et al. Cyclotron production of ⁶⁷Cu: A new measurement of the ⁶⁸Zn(p,2p)⁶⁷Cu, ⁶⁸Zn(p,2n)⁶⁷Ga and ⁶⁸Zn(p,3n)⁶⁶Ga nuclear cross sections. Nucleus [online]. 2018, n.63, pp. 1-5. ISSN 2075-5635.

The cross sections of the 68Zn(p,2p)67Cu,68Zn(p,2n)67Ga and 68Zn(p,3n)66Ga reactions were measured at the ARRONAX facility by using the 70 MeV cyclotron, with particular attention to the production of the theranostic radionuclide 67Cu. Enriched 68Zn material was electroplated on silver backing and exposed to alow-intensity proton beam by using the stacked-foils target method. Since 67Cu and 67Ga radionuclides have similar half-lives and same γ-lines (they both decay to 67Zn), a radiochemical process aimed at Cu/Ga separation was mandatory to avoid interferences in γ-spectrometry measurements. A simple chemical procedure having a high separation efficiency (>99%)was developed and monitored during each foil processing, thanks to the tracer isotopes 61Cu and 66Ga.Nuclear cross sections were measured in the energy range 35-70 MeV by using reference reactions recommended by the International Atomic Energy Agency (IAEA) to monitor beam flux. In comparison with literature data a general good agreement on the trend of the nuclear reactions was noted, especially with latest measurements, but slightly lower values were obtained in case of 67Cu. Experimental results of the 68Zn(p,2p)67Cu,68Zn(p,2n)67Ga and 68Zn(p,3n)66Ga reactions were also compared with the theoretical values estimated by using the nuclear reaction code TALYS. The production yield of the theranostic radionuclide 67Cu was estimated considering the results obtained in this work.

Palabras clave : isotope production; radioisotope generators; cyclotrons; cross sections; copper 67.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )