SciELO - Scientific Electronic Library Online

 
vol.37 número1Sistemas SCADA para la automatización de los procesos productivos del CIGBDiseño y análisis de tres canales de acondicionamiento de la señal de ECG para aplicaciones de Neuroetología índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Electrónica, Automática y Comunicaciones

versión On-line ISSN 1815-5928

Resumen

TRUTIE CARRERO, Eduardo; ARZOLA MORRIS, Pedro  y  ECHENIQUE BARBERO, María del Pilar. Active design of mixer with low noise figure for applications in the ISM 2.4 GHz band. EAC [online]. 2016, vol.37, n.1, pp. 38-46. ISSN 1815-5928.

In this paper the design of an active gate mixer is proposed to work at the center frequency of 2.4 GHz in the ISM band, in addition to its implementation to validate the results obtained by the simulation process. The substrate used for the circuit implementation is FR-4 with dielectric permittivity 4.5 and loss tangent of 0.022. The tools used for this design were the AWR Microwave Office v.9, APPCAD and building the CAM 350 software. The circuit size is 8 cm X 5.6 cm. Built circuit for converting a gain of 6.7 dB is achieved a noise figure of 3.9 dB.

Palabras clave : Mixer; Active mixer; Low noise mixer; Technology planar mixer; HEMT.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License