Mi SciELO
Servicios Personalizados
Articulo
Indicadores
- Citado por SciELO
Links relacionados
- Similares en SciELO
Compartir
Tecnología Química
versión On-line ISSN 2224-6185
Resumen
CALLEJAS-HERNANDEZ, Judith et al. Purification by Electrocoagulation in a Whey: Kinetics of the Process. RTQ [online]. 2012, vol.32, n.2, pp. 246-260. ISSN 2224-6185.
Liquid effluents have been treated by electrocoagulation (EC), obtaining encouraging results in the removal of contaminants. The aim of this study was the application of the EC for the treatment of acid whey with reduced organic loading . Whey were analyzed for their pH, pZ, isoelectric point and COD. We used a batch-type electrochemical reactor of 2 L and a study volta and chronopotentiometric conditions for potential and current using 3 electrodes supported on Teflon plate separation of 10 mm, aluminum and iron as anode and graphite oxide ruthenium/titanium cathode and a reference electrode. In and for the EC was evaluated considering the kinetics in response the highest percentage of COD removal or efficiency percentage, and variation of pH and pZ. We conclude that the best arrangement of electrodes was the Al-OxRut. In the first 8 hours, the pH increased from 4,82 to 8,67 and 6,56 for Fe and Al species. Among the top 10 and 12 h of EC maximum is reached significant change and the increased removal of COD by the formation of colloids and emulsions oxyhydroxides of iron and/or aluminum in the occlusion re-entering the organic macromolecules. The COD removals were higher with the pairs Al-OxRut and Al-Graf, who had a 83 % and 66 % respectively at 10 h. To arrange for iron is not reached up to 50 % efficiency.
Palabras clave : electrocoagulation; liquid effluents; chemical oxygen demand; zeta potential; efficiency.