Mi SciELO
Servicios Personalizados
Articulo
Indicadores
- Citado por SciELO
Links relacionados
- Similares en SciELO
Compartir
Ingeniería Mecánica
versión On-line ISSN 1815-5944
Resumen
VALIN-RIVERA, José Luis et al. Applied digital holography for evaluating hard metal chip. Ingeniería Mecánica [online]. 2017, vol.20, n.1, pp. 39-44. ISSN 1815-5944.
The objective of this work is the application of an interferometric method for validating the result of wear in a cutting tool insert of hard metal. We describe in this paper the experimental setup for the application of Digital Holography technique, used with digital recording of holograms on a CCD camera. The cutting insert inspected with the optical technique was previously mounted on a support structure and slightly heated with a halogen lamp for evidence of defective regions. For image processing, the software used, ProITec. It was possible to detect, with high resolution and contactless defects that could compromise the structural integrity of the insert analyzed, no defect was found. Analysis of the images obtained, it is verified that the object is deformed as a whole, not to present any visible alteration in their pattern of fringes.
Palabras clave : digital holography; hard metal chip; holographic interferometry; unwrapping.