SciELO - Scientific Electronic Library Online

 
vol.23 número3Determinación de la adsorción y desorción de pares zeolita-metanol en un ciclo de enfriamientoMetodología para la confección y selección de modelos matemáticos de caja negra para la simulación energética de enfriadoras tipo tornillo índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

CISNEROS RAMIREZ, César A.; MATHEU MUNIZ, Eduardo Miguel  y  FERNANDEZ-ABALLI ALTAMIRANO, Carlos. Modeling of an energy storage with phase change material in eccentric and finned tubes. Ingeniería Mecánica [online]. 2020, vol.23, n.3  Epub 01-Dic-2020. ISSN 1815-5944.

You must have at least 100 words and maximum150, writing in a paragraph. The study of simultaneous flow of liquid and gas over a conduit is two phases flow combinations more complex that exist. For the study we select fluid (glycerin in solution with water (80 %) and industrial gel) that establish flow models necessary for the investigation the desired systems. And is obtained from physical-mathematical analysis of obtained results made experiment for different configurations, a theorys experimental model have evaluate the drag coefficient and force acting on only bubble and train bubbles in job regimen for Reynolds value less and equal to 15. In the present study was performed computational modeling of different patterns, validated with experimental results. Simulations and results obtained for visualizing and analyzing the actual system behavior. These models are ready for been used for other configurations in future studies for other configurations in future studies.

Palabras clave : storage energy; model and simulation; eccentric and finned tubes.

        · resumen en Español     · texto en Español     · Español ( pdf )