Mi SciELO
Servicios Personalizados
Articulo
Indicadores
-
Citado por SciELO
Links relacionados
-
Similares en SciELO
Compartir
Revista de Ciencias Médicas de Pinar del Río
versión On-line ISSN 1561-3194
Rev Ciencias Médicas vol.27 supl.2 Pinar del Río 2023 Epub 01-Dic-2023
Articles
Use of bulk resins and their possible application in pediatric dentistry: systematic review of the literature
1Universidad Regional Autónoma de Los Andes. Ambato. Ecuador
ABSTRACT Introduction: Technological advances in the last decade have improved the quality of conventional resins, giving rise to Bulk resins, which can be used in thicknesses of 4 mm in comparison with other types of resins in which traditional resins can only be increased by 2 mm. Objective: determine the uses of Bulk resins in Pediatric Dentistry. Methods: A systematic review of the literature on the uses of bulk resins in pediatric dentistry was carried out. Articles written in Spanish, English and Portuguese, published in the period 2018-2023 in journals indexed in the PubMed/MedLine and Scientific Electronic Library Online (SciELO) databases were selected. The terms "Bulk Fill Resin" and "Pediatric Dentistry", as well as their English translations, were used to search for information. The Quality Assessment of Diagnostic Accuracy Studies was used to evaluate the quality of the articles. Results: The physical and chemical properties that make up Bulk resins impart hardness and esthetic qualities, they are made of nanocomposites, which results in higher adhesion points and less contracting agents that cause polymerization. There are several types of Bulk resins, all with excellent quality, each type of Bulk resin is specific for a different type of oral condition. They provide time benefits in the restorative process in pediatric patients. Conclusions: Bulk-fill resins are useful in pediatric dentistry as they minimize the time required for their application and therefore the time spent in the dental office.
Key words: PEDIATRIC DENTISTRY; RESINS; POLYMERIZATION; NANOCOMPOSITES.
INTRODUCTION
Early childhood caries (ECC) is represented as one of the most prevalent dental problems in this period.1 Its main signs and symptoms are pain, infection, interference with feeding, increased risk of new dental caries in deciduous and permanent organs and ultimately worse effects on the eruption of permanent teeth.2
Restoration of carious lesions is commonly performed on primary teeth, however, composite resins are a time-consuming and painstaking technique.3
Conventional resins continue to be the restorative material of choice in pediatric patients. Depending on the amount and type of filler, they have better mechanical properties and can be bonded and fused to the tooth for esthetic and functional results. In pediatric dentistry it is of vital importance to select restorative materials that have good clinical performance and short application time.
The improvement of the physical and mechanical properties of composite resins has made them one of the materials of choice for pediatric dentists. Bulk-fill resins are an innovative alternative for anterior and posterior restorations.4 Therefore, Bulk-Fill resins are a very convincing option for restoring primary or deciduous teeth.
Bulk-fill resins (RBF) have an efficient way of placement. They employ bulk-fill resin composites whose protocol is to place single layer thicknesses of 4 to 6 mm in contrast to the commonly used conventional thickness of 2 mm.5 This results in more efficient and faster placement.
The main disadvantage lies in the depth of polymerization and the quality of care; the material used must be durable and easy to place.6
An example of these resins is the SonicFillTM system (Kerr, USA), which is a material that has a high filler content by weight (83,5 %) and uses a handpiece that emits sonic energy, allowing the viscosity of the material to be lowered, which increases its adaptation to the cavity walls for better sealing.7
The simplicity and efficacy of massive filling compared to incremental techniques makes it preferable when working with pediatric patients, as it simplifies the process. The present literature review aims to determine the uses of Bulk resins in pediatric dentistry.
METHODS
A systematic review of the literature on the uses of Bulk resins in pediatric dentistry was carried out. The recommendations of the PRISMA-P guidelines were followed for the development of the research.8)
Search strategy
A search for information was carried out between May 10 and 15, 2023. Articles written in Spanish, English and Portuguese, published in the period 2015-2023 in journals indexed in the PubMed/MedLine and Scientific Electronic Library Online (SciELO) databases were selected. To obtain the information, a search strategy was employed by combining terms using Boolean operators "AND" and "OR". A search strategy adapted to the syntax of each database was established, filtering the title, abstract and key words fields. The terms "Bulk Fill Resin" and "Pediatric Dentistry" were used, as well as their English translations "Bulk-Fill resins" and "Pediatric dentistry".
Literature selection
The selection criteria were:
Data extraction
An analysis of the articles based on title and abstract was performed. Subsequently, of the remaining studies, the full texts were evaluated; this process was performed by two authors. A third author replicated the process to detect inconsistencies.
Evaluation of biases
The Quality Assessment of Diagnostic Accuracy Studies (QUADAS) was used to assess the quality of the studies, in which a study with a score equal to or greater than 10 is considered to be of high methodological quality.
Data analysis
The literature obtained was analyzed to determine the properties of these resins, the types available on the market and the clinical evidence in pediatric dentistry that supports their use. Tables were used to organize and display the data.
RESULTS
A total of 59 articles were reviewed, in which 20 were excluded on the basis of the title, 13 on the basis of the information found in the abstract and 10 after reading the articles in full text. Finally, 16 studies were included in the review, of which six were from journals indexed in SciELO and 10 in PubMed; nine of the articles were in vitro studies and two were randomized clinical trials (Table 1).
Table 1 Articles selected for the literature review
No | Authors | Year | Database | Type | Purpose of study |
---|---|---|---|---|---|
1 | Kazeminia et al.1 | 2019 | PubMed | Meta- analysis | Primary dental caries |
2 | Wagle et al.2 | 2018 | PubMed | Meta- analysis | Dental caries-pediatric patient |
3 | Gindri et al.3 | 2018 | PubMed | Randomized clinical trial | Composite Bulk Fill |
4 | Rojas Padilla et al.4 | 2021 | PubMed | In vitro study | Marginal microfiltration |
5 | Bin Nooh et al.5 | 2020 | PubMed | In vitro study | Light transmission |
6 | Rosa de Lacerda et al.6 | 2019 | PubMed | In vitro study | Mechanical performance and fracture reliability in Bulk-Fill composite resins |
7 | Pacheco Fernández et al.7 | 2015 | SciELO | In vitro study | Bulk-Fill with ultrasonic activation. |
8 | Çolak et al.9 | 2017 | PubMed | Randomized clinical trial | High viscosity Bulk-Fill composite resins. |
9 | Gan et al.10 | 2018 | PubMed | In vitro study | Curing of Bulk-Fill resins. |
10 | Corral et al.11 | 2018 | SciELO | Review | State of the art of Bulk-Fill Resins |
11 | Lima et al.12 | 2018 | PubMed | Review | Curing depth of Bulk-Fill Resins |
12 | Del Valle Rodríguez et al.13 | 2018 | SciELO | Review | State of the art of Bulk-Fill Resins |
13 | Paganini et al.14 | 2020 | PubMed | In vitro study | Marginal integrity of Bulk-Fill resins |
14 | Charamba et al.15 | 2017 | SciELO | In vitro study | Bond strength of restorations made with Bulk-Fill composite resins. |
15 | Nascimento et al.16 | 2016 | SciELO | In vitro study | Marginal microleakage of Bulk Fill resins in Class II cavities |
16 | Alvedaño Moran.17 | 2018 | SciELO | In vitro study | Bulk-Fill resin for restoration in pediatric dentistry. |
Source: Own elaboration.
TYPES OF BULK-FILL RESINS
Bulk-fill composite resins
This type of resin requires an additional layer for the occlusal surface and adequate consistency to complete the entire restoration. This material has remarkable esthetic qualities, as it includes two methacrylate monomers that act to decrease the shrinkage caused by polymerization. These Bulk-Fill composite resin composites can be applied and cured in thicker layers than conventional resin composites, providing us with better working time.11
As for commercial brands, there are two well-known brands; the first one, Ivoclar Vivadent contains Ivocerin which works as an indicator, its most mentioned quality is the esthetic finish it gives to the final oral work. On the other hand, there is the Filtek™ Bulk-Fill brand, which offers long duration.12
The use of this type of resins is generally in restorations of teeth deteriorated either by caries or enamel wear, in the restoration of core build-ups and in direct restorations, including also occlusal surfaces.13
The technique of using Bulk-Fill composite resins is almost similar to that of regular resins. First, the isolation is placed for a more aseptic working area, the surface to be worked on is cleaned by removing carious tissue, disinfection is carried out, acid etching is introduced, the adhesive system is applied and finally the resin is placed in 4 mm. The process is completed by light curing.13
The main advantages of Bulk-Fill composite resins lie in the reduction of working time. This allows their use in patients who require treatment in the shortest possible time, such as children, elderly patients and patients who have some type of temporomandibular problem. Among the negative aspects or disadvantages is that the polymerization shrinkage stress induced by the activation of the methacrylate-based monomers can cause resin leakage.13
Bulk-Fill resins with sonic activation
Sonic activated Bulk-Fill resins are monoincremental techniques in which thicknesses of 4-5 mm are used to achieve the restoration. The Bulk-Fill resins with sonic activation have a good filler weight of 83.5% and use equipment that emits sonic energy, decreasing the viscosity of the material.7
There are several brands on the market, including X-tra base from Voco, Filtek Bulk-Fill flowable restorative from 3M and Surefill SRD flow from Dentsply.12 Table 2 summarizes the most important features of each.
Table 2 Details on Bulk-fill Flowable Resins
Brand Name | Characteristics |
X-tra base de Voco | X-tra base has a fluid and malleable consistency. It has the quality of being self-leveling, which gives it the characteristic of easy handling and excellent flowability in small cavities. |
Filter Bulk-Fill flowable restorative de 3M | It is characterized by excellent wear resistance and, like Voco's X-tra base, it has the characteristic of being adaptable and, to a lesser extent, malleable. |
Surefill SRD flow (Dentsply) | In characteristics, it does not differ from the previous ones; its content is fluid so its handling is easy, but it can be placed in 4 mm layers. In addition, its use is suitable for free surfaces of the tooth. |
Source: Own elaboration.
The SonicFillTM is manually operated, therefore, the air is the channel to connect to the dental pieces. It can be attached to any Multiflex; the resin capsules are housed in the chamber, whose flow rate is 30 % more than other commercial tips, the plunger works with sonic energy, which is transferred to the tip.7
This type of resins can be applied in restorations where it involves high density resin cures and in superficial cavities where the carious lesion does not have a high corrosive aspect, besides being used in cavity bases.7
Because of its fluid aspect, it is easy to adapt and fill cavity walls, which is necessary in dentistry, since it avoids the formation of bubbles, and therefore decreases the probability of bacterial proliferation in the dental cavity. This facilitates a good curing and sealing, and avoids postoperative sensitivity.12
The limitation lies in the polymerization shrinkage, which can put the patient's tooth at risk. It cannot be used in very deep cures since the tooth tends to absorb water if the polymerization is not performed correctly, in addition to affecting the duration and esthetics of the restoration.7
Bulk-fill flowable resins
This type of resin handles polymerization shrinkage better, as it is composed of 20 % more methacrylate than the others, i.e. it contains 40 % of the composition. It is worth mentioning that it has compounds with low viscosity and higher resinous component, which is why they are preferred as restorative materials in dentistry.12 The low viscosity and therefore low molecular weight makes the resin that polymerizes harder.11
The use of Bulk-Fill Fluid resins is almost similar to that of common resins. The first step is to isolate the tooth, then all the carious tissue is removed, the acid etch is placed to dry it and then the adhesive system is placed. Once the cavity is prepared, it is placed without applying force on the material with an application syringe.11
One of the disadvantages of composite resin polymerization is the development of stress and shrinkage of the material. This stress effect on the polymer has been reported to cause problems such as bent spots, damaged teeth, leakage, or reduced mechanical properties of the material.11
Results and recommendations for the use of Bulk Fill resins
When evaluating the cusp curvature of premolar cusps in Class II restorations with Bulk Fill composite resin, significantly lower values were observed compared to conventional composite resins (incremental technique). Likewise, the polymer stress development in Bulk-Fill flowable resins was lower compared to conventional composite resins and conventional flowable composite resins.11
The depth of cure of Bulk-Fill resins depends on the polymerization time (Table 3). Therefore, some manufacturers recommend 20 seconds of photoactivation in 4 mm increments.
Similarly, it is affected by the use of LED devices showing an irradiance of 1000 mW/cm2 or higher to achieve an acceptable depth of cure in most composite bulk-fill resins. For this reason, an exposure time of approximately 20 seconds is recommended.12
Table 3 Manufacturer's recommendations for depth of cure and light-curing time for Bulk- Fill resins.
Resins | Maximum curing depth | Manufacturer's recommended light curing time in seconds (S) | |
---|---|---|---|
Minimum intensity |
1000 mW/cm2 intensity or higher. | ||
3M ESPE- FiltekT Bulk- Posterior restorative | 4mm (Clase I, III, IV, V) Posterior restorative (14) 5 mm (Class II) | Class I, III, IV, V (4 mm) 405 Class II (up to 5 mm) 20s per occlusal 20s per buccal + lingual | Class I, III, IV, V (4 mm) 205 Class II (More de 5 mm) 10s Occlusal 20s per occlusal 10s Buccal + Lingual |
3M ESPE-Filtek Bulk-Fill Fluida | 4 mm | Universal Shade 205 Tones: A1, A2, A3: 20 405 | Universal Shade 105 Tones: A1, A2, A3: 20 205 |
Dentsply -SDR Plus | 4 mm | Universal Shade 205 Tone: A1, A2, A3 405 | No recommendations |
Heraeus Kulzer - Venus Bulk-Fill | 4mm | 20s | No recommendations |
Ivoclar Vivadent- Tetric EvoCeram Bulk-Fill | 4mm | 20s | 10S |
Ivoclar Vivadent- Tetric EvoFlow Bulk-Fill | 4mm | 20s | 10s |
Kerr-SonicFill | 5mm | 20s (Minimum intensity of 650 mW/cm2) | 10s |
VisCalor Bulk | 5mm | Universal Shade 20s Tone: A1, A2, A3 | Universal Shade 10s Tone: A1, A2, A3 20s |
Source: Vargas, 2020.
Two studies,14,15 analyzed the critical integrity of Bulk-Fill resins of class II cavities in primary teeth, and the high viscosity Bulk-Fill resin tested in 4 mm increments. Similar critical integrity was found to be achieved and synthesized in conventional 2 mm increments. The difference they found was in the repair of enamel and cementum, which show a greater deterioration of marginal integrity.
Another study,16 concluded that conventional composite resins have a lower average bond strength and Bulk-Fill composites have a higher average bond strength.
Corrales et al.,11) noted that high-viscosity Bulk-Fill composite resins placed at 4-mm intervals achieved similar or even higher marginal integrity compared with traditional composites placed at 2-mm intervals.
For permanent teeth, several authors agree that the marginal integrity of restorations with Bulk-Fill resins is very similar to restorations made with conventional resins.12,15 However, marginal differences have been observed regardless of the integrity of the dental enamel and cement. restoration, with the latter being the most failed.12
DISCUSSION
Composite resin is the main restorative material used by direct placement techniques. Bulk-Fill resins is an alternative, with properties that make it a material of choice in pediatric patients. For this reason, its quality and characteristics have made it a material that is highly appreciated by pediatric dentists.
Chisini et al.,3 mention that incremental techniques have some drawbacks, although composite restorations meet esthetic criteria, they are not desirable due to polymerization shrinkage, gaps between increments, placement technique, postoperative pain, recurrence of caries due to gaps between the tooth and the restoration and eventual loss of the restoration.
In most cases, composite resins tend to break or loosen when used directly, but the adhesive used is the most influential factor, which makes this type of Bulk-Fill material clinically a faster restoration option in deciduous teeth.3)
Corral et al.,11) noted that there is no significant difference in marginal seal between Bulk-Fill resin placement and conventional resin placement. The mechanical properties of Bulk-Fill resins are lower than those of nanohybrid resins. However, they note that Bulk-Fill resins leak less due to less shrinkage during light curing, and deeper cavities may result in higher light curing being achieved.
Charaban et al.,15 studied the light transmission through different resins. It was found that in Bulk-Fill resins the transmission was higher and more effective compared to traditional composite resins. Other research,17 points out that higher translucency of Bulk-Fill resin has an impact on esthetics, where the same properties lead to better light transparency during light curing and improved polymerization range.
This is one of the main advantages when considering which type of material to use, as color has a great influence on the final appearance, the finish of the restoration, due to optical properties such as translucency. The light transmission of a material measures the difference in color or shade observed between a material of uniform thickness on a white or black background, providing an optimal visual perception value.
It should be noted that most of the articles identified are reviews or in vitro studies. In addition, there is a lack of studies that follow up the results of the use of these resins over a period of 10 and 15 years. This constitutes one of the limitations of the present study. It is important to conduct clinical studies that support the strength and performance of Buk-Fill resins.
CONCLUSIONS
Bulk-Fill resins, despite being composed mostly of materials similar to traditional resins, present greater bonding strength thanks to the two methacrylate monomers that act to reduce the shrinkage caused by polymerization. Bulk-Fill resins require less time for their use, hence they increase productivity in pediatric dentistry, in addition to presenting great results in their cost-benefit comparison.
BIBLIOGRAPHIC REFERENCES
1. Kazeminia M, Abdi A, Shohaimi S, Jalali R, Vaisi-Raygani A, Salari N, et al. Dental caries in primary and permanent teeth in children’s worldwide, 1995 to 2019: a systematic review and meta-analysis. Head Face Med [Internet]. 2020 [citado 10/05/2023]; 16(1):22. Disponible en: Disponible en: https://head-face-med.biomedcentral.com/articles/10.1186/s13005-020-00237-z 1. [ Links ]
2. Wagle M, D’Antonio F, Reierth E, Basnet P, Trovik TA, Orsini G, et al. Dental caries and preterm birth: a systematic review and meta-analysis. BMJ Open [Internet]. 2018 [citado 10/05/2023]; 8(3): e018556. Disponible en: Disponible en: http://www.ncbi.nlm.nih.gov/pubmed/29500202 2. [ Links ]
3. Gindri LD, Cassol IP, Fröhlich TT, Rocha R de O. One-year clinical evaluation of class II bulk-fill restorations in primary molars: a randomized clinical trial. Braz Dent J [Internet]. 2022 [citado 10/05/2023]; 33(6):110-20. Disponible en: Disponible en: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S0103-64402022000600110&tlng=en 3. [ Links ]
4. Rojas Padilla SV, Ríos Caro TE. Microfiltración marginal de resinas de relleno masivo y nanohíbrida en molares deciduos. Rev Cuba Estomatol [Internet]. 2021 [citado 10/05/2023]; 58(2):3278. Disponible en: Disponible en: https://revestomatologia.sld.cu/index.php/est/article/view/3278 4. [ Links ]
5. Bin Nooh AN, Al Nahedh H, AlRefeai M, AlKhudhairy F. The Effects of Irradiance on Translucency and Surface Gloss of Different Bulk-Fill Composite Resins: An in vitro Study. Clin Cosmet Investig Dent [Internet]. 2020 [citado 10/05/2023]; 12:571-9. Disponible en: Disponible en: https://www.dovepress.com/the-effects-of-irradiance-on-translucency-and-surface-gloss-of-differe-peer-reviewed-article-CCIDE 5. [ Links ]
6. Rosa de Lacerda L, Bossardi M, Silveira Mitterhofer WJ, Galbiatti de Carvalho F, Carlo HL, Piva E, et al. New generation bulk-fill resin composites: Effects on mechanical strength and fracture reliability. J Mech Behav Biomed Mater [Internet]. 2019 [citado 10/05/2023]; 96:214-8. Disponible en: Disponible en: http://www.ncbi.nlm.nih.gov/pubmed/31055211 6. [ Links ]
7. Pacheco Fernández C, Gehrkue Lorca A, Ruiz Araneda P, Gainza Aragonés P. Evaluación de la adaptación interna de resinas compuestas: técnica incremental versus bulk-fill con activación sónica. Av Odontoestomatol [Internet]. 2015 [citado 10/05/2023]; 31(5):313-21. Disponible en: Disponible en: http://scielo.isciii.es/scielo.php?script=sci_arttext&pid=S0213-12852015000500004&lng=en&nrm=iso&tlng=en 7. [ Links ]
8. Page MJ, McKenzie JE, Bossuyt PM, Boutron I, Hoffmann TC, Mulrow CD, et al. Updating guidance for reporting systematic reviews: development of the PRISMA 2020 statement. J Clin Epidemiol [Internet]. 2021 [citado 10/05/2023]; 134:103-12. Disponible en: Disponible en: https://linkinghub.elsevier.com/retrieve/pii/S0895435621000408 8. [ Links ]
9. Çolak H, Tokay U, Uzgur R, Hamidi MM, Ercan E. A prospective, randomized, double-blind clinical trial of one nano-hybrid and one high-viscosity bulk-fill composite restorative systems in class II cavities: 12 months results. Niger J Clin Pract. [Internet]. 2017 [citado 10/05/2023]; 20(7). Disponible en: Disponible en: https://www.ajol.info/index.php/njcp/article/view/161062 9. [ Links ]
10. Gan JK, Yap AU, Cheong JW, Arista N, Tan C. Bulk-Fill Composites: Effectiveness of Cure With Poly- and Monowave Curing Lights and Modes. Oper Dent [Internet]. 2018 [citado 10/05/2023]; 43(2):136-43. Disponible en: Disponible en: http://www.ncbi.nlm.nih.gov/pubmed/28976838 10. [ Links ]
11. Corral Núñez C, Fernández Godoy E, Martín Casielles J, et al. Current state of calciusilicate cements in restorative dentistry: a review. Rev Fac Odontol [Internet]. 2016 [citado 10/05/2023]; 27(2). Disponible en: Disponible en: https://revistas.udea.edu.co/index.php/odont/article/view/22830 11. [ Links ]
12. Lima RBW, Troconis CCM, Moreno MBP, Murillo-Gómez F, De Goes MF. Depth of cure of bulk fill resin composites: A systematic review. J Esthet Restor Dent [Internet]. 2018 [citado 10/05/2023]; 30(6):492-501. Disponible en: Disponible en: http://www.ncbi.nlm.nih.gov/pubmed/30375146 12. [ Links ]
13. del Valle Rodríguez AM, Christiani JJ, Álvarez N, Zamudio ME. Revisión de resinas Bulk-Fill : estado actual. Rev Ateneo Argent Odontol [Internet]. 2018 [citado 10/05/2023]; 58(1):55-60. Disponible en: Disponible en: https://ateneo-odontologia.org.ar/articulos/lviii01/articulo6.pdf 13. [ Links ]
14. Paganini A, Attin T, Tauböck TT. Margin Integrity of Bulk-Fill Composite Restorations in Primary Teeth. Materials (Basel) [Internet]. 2020 [citado 10/05/2023]; 13(17):3802. Disponible en: Disponible en: https://www.mdpi.com/1996-1944/13/17/3802 14. [ Links ]
15. Charamba CF, Meireles SS, Duarte RM, Montenegro RV, Andrade AKM De. Resistência de união de compósitos do tipo Bulk Fill: análise in vitro. Rev Odontol da UNESP [Internet]. 2017 [citado 10/05/2023]; 46(2):77-81. Disponible en: Disponible en: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1807-25772017000200077&lng=pt&tlng=pt 15. [ Links ]
16. Nascimento AS, Lima EA De, Durão M De A, Sousa Y De C, Correia TC, Braz R. Marginal microleakage in Bulk Fill resins. Rev Odontol da UNESP [Internet]. 2016 [citado 10/05/2023]; 45(6):327-31. Disponible en: Disponible en: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1807-25772016000600327&lng=en&tlng=en 16. [ Links ]
17. Alvedaño Moran L, Jiménez Miranda M, Sanín Rivera IP. Restauración estética con funda de celuloide y resina Bulk Fill en dientes temporales. Odontol Pediátrica [Internet]. 2018 [citado 10/05/2023]; 26(3):204-13. Disponible en: Disponible en: https://www.odontologiapediatrica.com/wp-content/uploads/2018/07/06_NC_334_Avenda%C3%B1o.pdf 17. [ Links ]
Received: July 16, 2023; Accepted: September 30, 2023