Meu SciELO
Serviços Personalizados
Artigo
Indicadores
-
Citado por SciELO
Links relacionados
-
Similares em SciELO
Compartilhar
Podium. Revista de Ciencia y Tecnología en la Cultura Física
versão On-line ISSN 1996-2452
Rev Podium vol.17 no.2 Pinar del Río maio.-ago. 2022 Epub 02-Ago-2022
Original article
Biomechanical differences of the technical gesture of the free half squat in professional and amateur bodybuilders
1Universidad de las Fuerzas Armadas ESPE. Ecuador.
The improvement of the sports technique is premised on comparing the values of the motor movement, this must be characterized to correct errors detected as part of the sports training management process. Emphasis is placed on highly technical sports, such as bodybuilding training. In this sense, the present research aimed to analyze the half-squat technique in professional and amateur bodybuilders as an empirical method (sport-specific measurement). The research is descriptive-explanatory of correlational order. Six variables of interest are correlated (X1: shoulder joint angle; X2: hip joint angle; X3: maximum speed reached; X4: maximum acceleration reached; X5: center of gravity in X; X6: center of gravity in Y). The means establish differences between independent groups, both in variable X1 (group 1: ≈66°; group 2: ≈70°; p=0.247 ), X2 (group 1: ≈73°; group 2: ≈86°; p=0.002 ), X3 (group 1: ≈1.03m/s; group 2:≈1.36m/s; p=0.017 ), X4 (group 1: ≈2.93m/s2; group 2: ≈4.78m/s2; p=0.011 ), X5 (group 1: ≈0.43m; group 2:≈0.65m; p=0.000 ), and X6 (group 1: ≈0.61m; group 2: ≈0.83m; p =0.000 ). Group 1 has a more effective technique, while the amateurs have less efficiency in biomechanical movement due to their inexperience, high values are shown in speed and acceleration, movement angles such as hip angles are included.
Key words: Biomechanics; Half squat; Bodybuilders; Professionals; Amateurs.
INTRODUCTION
Within the world of training, the biomechanical analysis of each technical gesture is essential because the motor execution must be impeccable, emphasized in those eminently technical sports. Goswami, (2020); Leon, et al., (2016). For this reason, the analysis of the technical gesture in sports such as bodybuilding becomes important to optimize the sports technique and, therefore, improve the muscular planes to be trained that include muscular asymmetry and other associated variables Burdukiewicz, et al., (2020). The bodybuilder, according to Sánchez-Rodríguez (2019, includes a series of exercises aimed at the excessive development of the muscles, which allow hypertrophies that must be harmonically developed by the muscle mass. It is considered in many cases as something extraordinary; the aim is to push the body to the limit with specialized training and sometimes with the use of legal or non-legal substances. These facilitate the growth and muscular enhancement of the organism (Díaz Cevallos, et al., 2019; Schoenfeld, et al., 2020; Montuori, et al., 2021). The bodybuilder has well-defined features due to long periods of training and results in highly developed muscles. These elements are achieved with a great diet and excessive supplementation of carbohydrates, proteins and vitamins, which seek localized muscle hypertrophy as the main objective in each training session, in order to compete at the highest level, according to the category.
The squat is a multi-joint exercise in which the ankle, hip and knee work; there is a great muscular activation during the whole movement. On the other hand, Trujillo, et al., (2020) point out that the muscles involved in the squat, to a large extent, are: quadriceps, glutes, calves and hamstrings. The execution of this exercise consists of the flexion and extension of the knee and the movement of the weight that is above the shoulders. Everett, (2020) classifies the squat in half squat and deep squat: for which they refer to the half squat to execution at an angle that does not exceed 90 degrees. In the deep squat, a variant is shown in which it is sought to sit on the calves at an inclination between 60 to 65 degrees.
The biomechanics of the half squat is a subject that is exposed to various points of view by training and health professionals. This arises as a result of the position of the feet, the angles of execution of the exercise, the speed and acceleration of the same, as well as the center of gravity of the performer. The half squat is an exercise that involves, to a large extent, muscle groups such as the quadriceps, abdomen, back, and glutes (Quevedo, et al., 2021).
The half squat is an exercise widely used in the world of applied sports training (Morales, 2013). This originates because of the requirement in the majority of the musculoskeletal system to execute the motor movement. In many areas of biomechanics, specifically, and sports science, in general, the half squat is a well-studied movement. This is defined as a complex process as it is a movement that involves muscles of the lower body and joints such as the hips, ankles and knees. These are useful for completing numerous motor skills in various sports and as part of specialized exercises to enhance physical abilities such as strength (Beato, et al., 2019; Shalmanov, Lukunina, 2020). The half squat is one of the most used daily movements by human beings, such as: sitting at work or in a means of transport, lifting a child or picking up an object from the floor, as well as lifting shopping bags and take them inside the home (Blanco-Díaz, Quitian-González, 2018).
A good execution of the technical gesture of the half squat is essential to avoid the risk of injury to athletes and amateurs. For this reason, the analysis of the technique and the motor gesture must be essential at the time of carrying out the exercise, taking as a methodological basis the results issued by professionals, an aspect that can serve as a theoretical basis to form effective intervention actions.
Therefore, this research aims to analyze the free half squat to improve technique in amateur athletes, taking professional bodybuilders as the main reference.
MATERIALS AND METHODS
For the present research, a total of 43 study subjects were taken into account, selected under an intentional, non-probabilistic sampling, which maintain their preparation in the specialized Training Zone center, located in the city of Quito, Ecuador. Two independent groups were created to establish the relevant comparisons: group 1 made up of professionals (20 subjects), and group 2 made up of amateurs (23 subjects), all male.
The inclusion criteria for the selection of professionals are:
Have a high competitive level.
Have been practicing the discipline for years.
Do not have any type of disability that allows the athlete to perform the exercise.
The inclusion criteria for amateurs are the following:
Do not maintain a long training path.
Almost zero experience in training.
Do not have any type of disability that allows to perform the exercise.
For the analysis of the variables, a video camera was used to obtain evidence of the performance of the technical gesture, which was subsequently analyzed with the Kinovea biomechanical analysis tool. This allowed to study some variables, such as:
X1 Angle of the shoulder joint.
X2 Angle of the hip joint.
X3 Maximum speed reached.
X4 Maximum acceleration reached.
X5 Center of gravity at X.
X6 Center of gravity at Y.
To carry out the study of the technical gesture of the half squat, each of the study subjects performed the exercise in the best possible way and thus be able to reach a specific analysis for the study. While, in the case of amateurs, they performed the execution of the half squat in the way they could do it. In both types of athletes, a 20-minute general and specific warm-up was previously performed. For this reason, the research strategy is of a descriptive-explanatory type of correlational order.
As there was no normal distribution of the data, a non-parametric correlational statistical study was applied to two independent samples. The latter is presented as the Mann-Whitney U Test (p≤0.05).
RESULTS AND DISCUSSION
Table 1 shows the data obtained in the six biomechanical variables analyzed in the half squat technique as part of the study required in professional bodybuilders (Table 1).
The means obtained by the professional bodybuilders are tabulated as part of the last row (Table 1), where an average is obtained in the variable "X1" of ≈66°. This is shown as the angle of the shoulder joint less than the average obtained in amateur bodybuilders who presented a≈70° (Table 2). On the other hand, the professional bodybuilders presented a mean in the variable "X2" of ≈73°, a mean in the variable "X3" of ≈1.03m/s, in the variable "X4" of ≈2.43m/s2, a mean in the variable "X5" of ≈0.43m and a mean in the variable "X6" of ≈0.61m.
In the case of the results obtained with the six variables analyzed from amateur bodybuilders, table 2 shows their general tabulation.
As in the previous table, the means obtained are shown in the last row of table 2, where the mean obtained in the variable "X1" was H"70°. Here, the average presented by the professionals is presented to a greater degree, although no significant differences were found (p=0.247). This is the case as calculated with the Mann-Whitney U Test (Table 3). In this sense, it is determined that there is no variation in these values, and that the amateurs maintain a correct angulation in the position of the shoulders. It was developed like this, when executing and positioning the shoulder during the half squat exercise.
On the other hand, the variable "X2" obtains a mean of ≈86°; this is the angle of the hip joint greater than that presented by professionals; significant differences prevail (p=0.002). For the analysis of the second point, the position angle was referenced to the hip as the main point and the inclination that the analysis program showed for both population groups. This denotes a very different execution of the half squat exercise; this situation is due, to a large extent, to the lack of technique and to the lesser practice of physical exercise. This exercise provides a greater or lesser inclination of the hip joint, which can be harmful in the long term if the technique and motor position of the movement are not corrected. This is the same for the distance of the feet as for the position of the bar, the weight and, of course, the inclination of the hip.
The variable "X3" presented an average of 1.36 m/s, being the maximum speed reached less than that presented in group 1, with significant differences in favor of the group of professional bodybuilders (p=0.017). In the case of the variable "X4", the average presented by the amateur bodybuilders was established at 4.78m/s2, with the maximum acceleration being much higher than that established in the professional bodybuilders, with a significant difference (p=0.011).
For the analysis of the two aforementioned variables, in the speed and maximum acceleration reached within the execution of the half squat, a great variation can be noted, the values of the ranges (Table 3). This variation determined average values of 17.10 for the speed ranges, while the amateurs increased these values to 26.26. In this, a higher value is shown than that of professional athletes, while the same thing happened in the maximum acceleration of the half squat exercise. The data that the professional bodybuilders showed was 16.75 and the data of the amateurs amounted to 26.57.
The great variation between both population groups, to a large extent, is due to the speed of execution of the exercise in amateurs, due to the fact that they do not control the performance of the half squat, in many cases without showing a good technique and control of the movement weight on the bar.
For the case of the variable "X5", the mean established in group 2 was 0.65m, greater than that established in group 1; significant differences (p=0.000) prevail in the center of gravity of the X axis, as well as in the center of gravity in the Y axis (p=0.000). In this case, a mean of 0.83m was established in group 2, higher than that established in group 1.
In the center of gravity analysis, the average values as well as the ranges (Table 3) and (Table 4) vary in both the X-axis and the Y-axis. This variation of the values in the center of gravity is caused by the differences in height and weight in each participant and, to a large extent, due to the execution they showed in performing the technical gesture of the half squat.
All the correlations described, as well as the ranges determined by the Mann-Whitney U, are shown as part of Table 3 (Table 4).
Table 3. - Results of the Mann-Whitney U Test in the biomechanical variables of each independent group
![](/img/revistas/rpp/v17n2//1996-2452-rpp-17-02-465-gt7.png)
Characterizing technical movements from a biomechanical point of view is a necessity for the sciences of physical activity and sport. Here, various comparisons are made that lead to analyzes that explain important details for the sports training management process (Andrade, et al., 2019). In the case of the study of the half squat, the literature shows numerous works directly related to specific sports such as the triple jump (Ródenas, et al., 2020). Its effects on specific performance, while various analyzes focus on related variables such as the range of motion in the squat exercise on neuromuscular and functional adaptations (Martínez-Cava, Morán-Navarro, 2019). The incidence of muscle mass in the lower limbs indicates the maximum repetition in the half squat. In any case, the analysis of the motor movement studied is essential to perfect the sports technique; this serves as a theoretical and methodological basis for error correction and, therefore, for specialized motor improvement.
As an alternative proposal, it is recommended to design a guide on error correction for the execution of the half squat exercise in amateur bodybuilders; as well as greater attention to sports technique in general by coaches and physical assistants.
CONCLUSIONS
The correct execution of the exercise by the bodybuilder complied with the requirements established within the bibliographic compilation; an effective technique is obtained and mainly avoids problems such as injuries.
In the execution of the technical gesture in amateur bodybuilders, a lower efficiency in the biomechanical movement of the half squat was determined. This was possible due to the lack of experience in performing the studied movement. High values are shown in the parameters studied, such as: speed and acceleration; angles of movement are included and the angle of the hip is emphasized.
ACKNOWLEDGMENT
To the specialized TRAINING ZONE club, for providing the facilities in the study and the predisposition shown by the subjects to carry out the research. Also, to the teachers of the University of the Armed Forces Espe for imparting knowledge and guides during academic training.
Afidesa Research Group (Physical Activity, Sports and Health) of the University of the Armed Forces Espe, for the advice and implementation of the intervention proposal.
REFERENCIAS BIBLIOGRÁFICAS
Shalmanov A.A., Lukunina E.A. (2020). Power snatch and jerk sequences in classical weightlifting movements: Phasing and timing test method. Theory and Practice of Physical Culture, 5, 48-51. https://cyberleninka.ru/article/n/power-snatch-and-jerk-sequences-in-classical-weightlifting-movements-phasing-and-timing-test-method [ Links ]
Andrade, J. B., Villarroya-Aparicio, A., & Morales, S. C. (2019). Biomecánica de la marcha atlética. Análisis cinemático de su desarrollo y comparación con la marcha normal. Revista Cubana de Investigaciones Biomédicas, 36(2), Article 2. http://www.revibiomedica.sld.cu/index.php/ibi/article/view/14 [ Links ]
Beato, M., Bigby, A. E. J., De Keijzer, K. L., Nakamura, F. Y., Coratella, G., & McErlain-Naylor, S. A. (2019). Post-activation potentiation effect of eccentric overload and traditional weightlifting exercise on jumping and sprinting performance in male athletes. PLoS ONE, 14(9), Article 9. https://doi.org/10.1371/journal.pone.0222466 [ Links ]
Blanco-Díaz, C. F., & Quitian-González, A. K. (2018). Análisis biomecánico del ejercicio sentadilla libre en sujetos sin acondicionamiento físico. Revista Ontare, 6. https://doi.org/10.21158/23823399.v6.n0.2018.2423 [ Links ]
Burdukiewicz, A., Pietraszewska, J., Andrzejewska, J., Chromik, K., & Stachoñ, A. (2020). Asymmetry of Musculature and Hand Grip Strength in Bodybuilders and Martial Artists. International Journal of Environmental Research and Public Health, 17(13), Article 13. https://doi.org/10.3390/ijerph17134695 [ Links ]
Cevallos, A. C. D., Pazmiño, S. M. A., Calderón, Á. F. Y., Velasco, W. F. S., & Morales, S. C. (2019). Antropometría y fuerza máxima en fisiculturistas. Estudio en la Universidad de las Fuerzas Armadas ESPE. Revista Cubana de Investigaciones Biomédicas, 36(1), Article 1. http://www.revibiomedica.sld.cu/index.php/ibi/article/view/37 [ Links ]
Encina Trujillo, M. O., Nogales, O. I., Camacho, L. P., & Domínguez, F. J. A. (2020). Método hibrido de ejercicios de crossfit-halterofilia para el desarrollo de la fuerza-resistencia en Judo y Karate-do. Revista de Ciencias del Ejercicio FOD, 15(2), Article 2. https://doi.org/10.29105/rcefod15.2-44 [ Links ]
Everett, G. (2020). Halterofilia: Guía completa para deportistas y entrenadores. Paidotribo. https://books.google.com.cu/books/about/Halterofilia.html?id=WWf7DwAAQBAJ&redir_esc=y [ Links ]
Martínez-Cava, A., & Morán-Navarro, R. (2019). Efectos del rango de movimiento en el ejercicio de Sentadilla sobre las adaptaciones neuromusculares y funcionales. Digitum, Biblioteca Universitaria. https://digitum.um.es/digitum/handle/10201/76883 [ Links ]
Montuori, P., Loperto, I., Paolo, C., Castrianni, D., Nubi, R., De Rosa, E., Palladino, R., & Triassi, M. (2021). Bodybuilding, dietary supplements and hormones use: Behaviour and determinant analysis in young bodybuilders. BMC Sports Science, Medicine and Rehabilitation, 13(1), 147. https://doi.org/10.1186/s13102-021-00378-x [ Links ]
Pérez, S., Calero Morales, S., & Cevallos, E. (2016). Morfología funcional y biomécanica deportiva. Publisher: Editorial de la Universidad de las Fuerzas Armadas ESPE ISBN: 9789978301234. https://www.researchgate.net/publication/319701166_Morfologia_funcional_y_biomecanica_deportiva [ Links ]
Quevedo, M. A., Rodríguez, K. A., & Chávez, M. R. (2021). Análisis cinemático de la ejecución de la sentadilla en fisicoculturistas del gimnasio de Bayamo (Original). Revista científica Olimpia. Olympia, 18(1), 545-557. 19 de septiembre de 2021. https://revistas.udg.co.cu/index.php/olimpia/article/view/2342 [ Links ]
Ródenas, J. G., Desantes, A. T., & Ramírez, E. S. (2020). Relación entre la velocidad de ejecución de media sentadilla bipodal y unipodal con el triple salto unilateral. Revista Internacional de Deportes Colectivos, 42, 50-59. https://dialnet.unirioja.es/servlet/articulo?codigo=7385714 [ Links ]
Rodríguez, A. J. S. (2019). Fisicoculturismo.Orígenes antropológicos y connotaciones filosóficas. Dykinson S.L. https://books.google.com.cu/books/about/Fisicoculturismo_Or%C3%ADgenes_antropol%C3%B3gic.html?id=Wkm_DwAAQBAJ&redir_esc=y [ Links ]
Schoenfeld, B. J., Alto, A., Grgic, J., Tinsley, G., Haun, C. T., Campbell, B. I., Escalante, G., Sonmez, G. T., Cote, G., Francis, A., & Trexler, E. T. (2020). Alterations in Body Composition, Resting Metabolic Rate, Muscular Strength, and Eating Behavior in Response to Natural Bodybuilding Competition Preparation: A Case Study. The Journal of Strength & Conditioning Research, 34(11), 3124-3138. https://doi.org/10.1519/JSC.0000000000003816 [ Links ]
Uppal, D. A. K., & Goswami, D. J. (2020). Kinesiology and Biomechanics. Friends Publications India https://books.google.com.cu/books/about/Kinesiology_and_Biomechanics.html?id=gyXsDwAAQBAJ&redir_esc=y [ Links ]
Received: January 11, 2021; Accepted: February 28, 2022