SciELO - Scientific Electronic Library Online

 
vol.35 número2Remoción de iones hierro(II) en medio acuoso con una toba vítrea naturalMicroestructura de una aleación níquel-cromo-molibdeno soldada con electrodos revestidos índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Minería y Geología

versão On-line ISSN 1993-8012

Resumo

HERNANDEZ-DE LA TORRE, Jesús; GARCIA-DOMINGUEZ, Asdrúbal Braulio  e  MARTIN-CARVAJAL, Luis Orlando. Gray cast iron for sugar mills trash plates. Min. Geol. [online]. 2019, vol.35, n.2, pp. 210-219. ISSN 1993-8012.

Improved materials are required for increasing the durability of sugar mills trash plates, considering their mechanical properties. The aim of this work was to obtain a gray cast iron, slightly alloyed with chromium, to raise the combined wear resistance. The gray alloy cast was proposed with 0,5% Cr and 0,1% Sn, with a high level of perlite, and the performance of its properties was compared with the other experimental alloys. Finally, it is demonstrated that the values of hardness and combined strength of the proposed alloy are adequate and guarantee an acceptable machinating, which makes this alloy an advantageous material in comparison with those currently used.

Palavras-chave : gray cast iron; laminar graphite; sugar mills; trash plates; machinating; tribologic pair.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )