SciELO - Scientific Electronic Library Online

 
vol.36 número1Transformaciones microestructurales por efecto del calor en una unión disímil de acero 17-4 PH y Hastelloy C-276La pequeña minería de oro en la parte central de la Sierra Maestra: perspectivas económicas en el contexto actual índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Minería y Geología

versão On-line ISSN 1993-8012

Resumo

VIADA-ESTEVEZ, Aurelia  e  FERNANDEZ-COLUMBIE, Tomás H.. Performance of the microstructure of cast iron joints with different input material. Min. Geol. [online]. 2020, vol.36, n.1, pp. 92-105.  Epub 31-Mar-2020. ISSN 1993-8012.

Performance of the microstructure cast iron joints with different material was characterized after applying the thermal welding cycle. For the metallurgical joint in cast iron plates 10 millimeters thick and V preparation at 60 °, E 309L-16, UTP 8 and UTP 86 FN electrodes were selected. With E 309L - 16, the solidification is of a Widmanstátten or acicular austenite morphology with presence of carbides and with UTP 8 a ferritic matrix is obtained with formation carbides inside. Both are prone to cracking; for the UTP 86 FN an austenitic structure was obtained with a small amount of delta ferrite and a better solidification.

Palavras-chave : microstructural analysis; solidification; welding; molten iron; input material.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )