SciELO - Scientific Electronic Library Online

 
vol.51 número3Atividade antifúngica de produtos naturais indicados por raizeiros para tratamento de candidíase oralReimplante dentario después de 72 horas avulsionado índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Cubana de Estomatología

versão impressa ISSN 0034-7507

Resumo

NINO BARRERA, Javier Laureano; CORTES-RODRIGUEZ, Carlos Julio  e  AGUILERA CANON, Mara Catalina. Usefulness of shaping the glide path before using rotary nickel-titanium endodontic files. Rev Cubana Estomatol [online]. 2014, vol.51, n.3, pp.270-279. ISSN 0034-7507.

Introduction: materials, techniques and designs continue to be studied with the purpose of reducing the incidence of fracture in endodontic instruments. Shaping of the glide path has been proposed for this end; however, its usefulness has been a matter of controversy. Objective: based on the finite element method, carry out a theoretical analysis of the usefulness of shaping the glide path before using rotary nickel-titanium endodontic files. Methods: numerical simulation was performed based on finite element analysis, to achieve which mathematical models were built of rotary nickel-titanium files S1 and S2 of the Protaper™ series. Autodesk™ Simulation Multiphysics software was used to program the mechanical properties of the files, as well as a fracture failure limit of 1270.588 MPa. The torque recommended by the manufacturer was then applied and the instrument tip fixed into place (without shaping the glide path) with restrictions on all degrees of freedom. In order to simulate glide path shaping, restrictions were applied to all degrees of freedom at a certain distance from the instrument tip, thus simulating that the instrument tip remained free. Results: on fixing the file tips, maximum efforts were 1545.77 Mpa for S1 and 1306.47 Mpa for S2. Instrument fracture was observed. When files were fixed at a distance from the tip, no fracture was observed. Conclusions: it was theoretically demonstrated that when file tips are prevented from being caught, fracture is prevented as well, and such catch is avoided by shaping the glide path. It is therefore concluded that the procedure is useful to prevent the fracture of rotary nickel-titanium instruments.

Palavras-chave : shaping the glide path of the root canal; rotary files; nickel-titanium; torque.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )