SciELO - Scientific Electronic Library Online

 
vol.39 número3Especies reactivas del oxígeno y balance redox, parte I: aspectos básicos y principales especies reactivas del oxígenoEstándares de calidad en los ensayos clínicos: ISO 9001-Buena Práctica Clínica índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Cubana de Farmacia

versão impressa ISSN 0034-7515versão On-line ISSN 1561-2988

Resumo

LOPEZ MARZO, Adaris María  e  PIERRE MARZO, Rosalba Alejandra. Setting acceptable limit for cleaning residues in manufacturing equipment of the drug industry. Rev Cubana Farm [online]. 2005, vol.39, n.3. ISSN 0034-7515.

At present, the demands of the governing bodies of Good Manufacturing Practice aimed at assuring the quality and consistency of pharmaceuticals are increasing. One of the basic aspects that the authorities make emphasis on is the cleaning validation program, particularly the validation of manufacturing equipment cleaning methods. There is no clear-cut guide to setting cleaning residues limit but very general guidelines for a great variety of drugs and manufacturing situations. To this end, the paper gathered and analyzed different criteria for estimation and selection of the acceptable residue limit. Some solutions for certain situations that may occur in practice were suggested and the importance of a right limit setting was underlined. It is expected that this paper be useful for the detection of situations where each limit approach may be convenient.

Palavras-chave : Acceptable cleaning residue limit; manufacturing equipment; drug industry.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons