SciELO - Scientific Electronic Library Online

 
vol.26 número1Disección neumática en dos pasos para la preparación del tejido donante en queratoplastia endotelial de la membrana de DescemetCirugía de cataratas por facoemulsificación aplicando la técnica de prechop índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Cubana de Oftalmología

versión impresa ISSN 0864-2176

Resumen

CAPOTE CABRERA, Armando et al. Conic corneal trephination as a new cutting profile for penetrating and anterior lamellar keratoplasties. Rev Cubana Oftalmol [online]. 2013, vol.26, n.1, pp.15-29. ISSN 0864-2176.

Objectives: to describe the characteristics and use of the conic corneal trephination. Methods: an experimental study was performed in "Ramón Pando Ferrer" Cuban Institute of Ophthalmology from January to December 2010. Ten eyeballs not useful for transplantation underwent trephination, with a corneal vacuum trephine particularly designed to create an oblique corneal cut. The cutting length, the corneal thickness, the external diameter of the disc, the internal diameter of the disc and the cutting angle were the analyzed parameters. Descriptive statistics were applied to show the results. Results: the mean cutting length was 1776.7 ± 273.7 mm and the mean corneal thickness at the cutting point was 850.0 ± 119.2 mm , being the difference between them equals to 926 mm. The mean external diameter was 7.6 ± 0.2 mm and the internal diameter was 8.5 ± 0.4 mm, with a difference of 0.9 mm. The mean cutting angle amounted to 28.4 ± 2.1°. A formula was developed to calculate the cutting length or depth based on the mean pachymetry of the circle where the trephination is performed for a determined cutting angle. Conclusions: aregular symmetric cut was obtained, longer than the corneal thickness with the planned conic profile. Such cutting pattern provides a larger contact surface and self-sealing tendency.

Palabras clave : keratoplasty; cutting angle; conical trephination.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons