SciELO - Scientific Electronic Library Online

 
vol.36 número2Procedimiento para diseñar el muestreo eólico en una región promisoria. Parte I Teoría y algoritmo generalMejoramiento de la eficiencia energética en los procesos de extrusión de tuberías plásticas índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Energética

versión On-line ISSN 1815-5901

Resumen

TERRERO MATOS, Eduardo; LEGRA LOBAINA, Arístides Alejandro  y  CARCASSES CARCASSES, Joel. Procedure to design sampling of the wind speed in a promissory region. Part II. Implementation and application. Energética [online]. 2015, vol.36, n.2, pp.210-219. ISSN 1815-5901.

In Part I of this article was established the general algorithm of a procedure for the sampling design of the wind speed and the results have the ability to minimize the average probable error for an estimate of the conduct spatiotemporal wind speed. In Part II the selection algorithm of sampling points and the algorithm for calculating the probable error estimation is described. The procedure for the sampling design is implemented in an computer software that facilitates the application from the procedure to the selection of the points where the anemometer towers will be located in a promissory region of the municipality Moa in the province Holguín, Cuba. The results are compared with the design obtained in 2007 by the Empresa de Ingeniería y Proyectos de Electricidad of the Ministry of Energy and Mines of the Republic of Cuba.

Palabras clave : estimate the potential of wind energy; sampling wind speed; roughness; topography; wind speed.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons