SciELO - Scientific Electronic Library Online

 
vol.35 número3Compensación y calibración de transmisores de presión piezorresistivos de alto desempeño de forma simultáneaImplementación de los protocolos de comunicación para VoIP: RTP/RTCP, sobre FPGAs de altera índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Electrónica, Automática y Comunicaciones

versión On-line ISSN 1815-5928

Resumen

SOMOZA CHUAY, José Alejandro; EIREZ IZQUIERDO, José Enrique; PAVONI OLIVER, Sonnia  y  MARTIN RODRIGUEZ, Eduardo. Construction and characterization of Glass/ITO/PANI electrodes for pH measurements. EAC [online]. 2014, vol.35, n.3, pp.33-38. ISSN 1815-5928.

The electronic properties of organic materials can be changed by the influence of different chemical agents. These changes give the possibility to use these materials in different applications like sensors. One of the organic materials studied as detection layer for this kind of sensors is polyaniline (PANI). In this work a Glass/ITO/PANI electrode of 2.5 cm x 1.5 cm x 0.25 cm was constructed using layer by layer (LbL) technique. The potentiometric response was obtained through an instrumentation amplifier (INA116), using a reference electrode (Ag/AgCl) and a work electrode of Glass/ITO/PANI. Buffer solutions with different pH values were evaluated. As results of electrodes characterization, the sensibility of the potentiometric response was -55,12 mV/pH.

Palabras clave : ITO; PANI; pH; electrodes.

        · resumen en Español     · texto en Español     · Español ( pdf )