SciELO - Scientific Electronic Library Online

vol.15 número1Análisis experimental del torneado de alta velocidad del acero AISI 1045Propuesta de un modelo para el análisis de criticidad en plantas de productos biológicos índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados



  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO


Ingeniería Mecánica

versión On-line ISSN 1815-5944


FERNANDEZ-COLUMBIE, Tomás; RODRIGUEZ-GONZALEZ, Isnel; QUINTANA-PUCHOL, Rafael  y  GARCIA-DOMINGUEZ, Asdrúbal. Determination of stress for x-ray of the steel AISI 1045 deformed for roller. Ingeniería Mecánica [online]. 2012, vol.15, n.1, pp. 23-33. ISSN 1815-5944.

The objective of the paper is to carry out the analysis from the tensions to steel samples AISI 1045 hardened cold for roller. With employment of the method of Willianson-Hall was determined the macro and micro deformations; the reticular deformation of the net parameter; the size of the crystallites; the efforts in the crystalline net and the reduction of the size average of the grains, what allowed to establish the mechanisms of hardening of the steel AISI 1045, deformed by rolling. They were measured and analyzed different points keeping in mind the indexes of Miller for the phase ferrite of the steel. The obtained lineal models, they are statistically significant that they show a growing tendency of the mechanical estates and metallurgical, as the independent variables of the experimentation process are increased.

Palabras clave : roller; rolling; plastic deformation.

        · resumen en Español     · texto en Español     · Español ( pdf )