SciELO - Scientific Electronic Library Online

 
vol.17 issue1Evaluation of waste heat recovery in frigorific industryTolerance induced damage under cyclic contact loading of WC-Co cemented carbides author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería Mecánica

On-line version ISSN 1815-5944

Abstract

CORREA-SUAREZ, Rodney E.; FERNANDEZ-COLUMBIE, Tomás; RODRIGUEZ-GONZALEZ, Isnel  and  ALCANTARA-BORGES, Dayanis. Behaviour microstructure of an alloy TI-6 AL-4V used in leached pulp. Ingeniería Mecánica [online]. 2014, vol.17, n.1, pp.22-31. ISSN 1815-5944.

In this article, we study various solution schemes reported in the literature, which deal with the problem of irregular parts distribution on flat surfaces with two-dimensional nesting. Different solution schemes were analyzed, which they consider to be the real geometry of the part, during the evaluation and positioning them on the surface to be cut, ensuring the best use of the material. The proposed scheme is characterized by a graphic treatment of the pieces that can accelerate the process of recognition and evaluation of options coupling between them, as well as the creation of cluster populations growing to its final location on the surface to be cut. In the generation of populations of possible solutions, using an algorithm based on the method of integration variables, in addition is made comparing the results obtained by the proposed method with other results generated by procedures developed by different authors, achieving improved use.

Keywords : leached pulp; cycle thermal; microstructure; titanium; isotherm.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )