SciELO - Scientific Electronic Library Online

 
vol.17 número1Coeficientes de transferencia de calor experimental para el enfriamiento de licor en intercambiadores de placasModelado del sistema de enfriamiento primario en máquinas de colada de acero con cristalizador curvo índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

REYES-RODRIGUEZ, Maida Bárbara et al. Automatization and optimization of shell and tube heat exchangers design using the method of Taborek. Ingeniería Mecánica [online]. 2014, vol.17, n.1, pp.78-89. ISSN 1815-5944.

Shell and tube heat exchangers are the most important equipment for heat transfer without combustion in plants of chemical processes.There are many methods for designing shell and tube heat exchangers in literature. Among the most known are the Kern´s Method, the Method of Bell Delaware, the Method of Tinker, the Method of Wills and Johnston and the Method of Taborek. The objective of this paper is to describe and automate the Taborek´s method. It is also realized and optimization of the heat exchanger cost using the genetic algorithm and Simulated Annealing. It can be concluded that the optimization using both methods conduces to similar results, diminishing considerably the optimized exchanger cost

Palabras clave : optimization; Heat Exchangers; Taborek; Genetic Algorithms.

        · resumen en Español     · texto en Español     · Español ( pdf )