SciELO - Scientific Electronic Library Online

 
vol.17 número1Automatización y optimización del diseño de intercambiadores de calor de tubo y coraza mediante el método de Taborek índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

DIAZ-HERNANDEZ, Yusdel; FIOL-ZULUETA, Alberto  y  ARZOLA-RUIZ, José. Modelling of continuos casting steel during first cooling system with curve mold. Ingeniería Mecánica [online]. 2014, vol.17, n.1, pp.90-97. ISSN 1815-5944.

In the process of primary cooling in the continuous casting of Steel there are physical transformations that affect directly the quality of the final product. The mathematical models that explain this phenomenon cannot be applied to different installations because the variables involved in the process are different. In this research, a physical-statistical model was obtained through multiple and successive regression for the flow of water which is necessary in this complex process. For the modeling the variables of operations in the cured cooling systems were taken into account as well as the statistical validation in conditions of exploitation in real time. The model permitted to predict the behavior of the variables with sufficient precision.

Palabras clave : cooling; solidifications; continuous casting; modeling; steelmaking.

        · resumen en Español     · texto en Español     · Español ( pdf )