SciELO - Scientific Electronic Library Online

 
vol.17 número3Evolución de los modelos constitutivos de respuesta pasiva para paredes arterialesPropiedades fisicoquímicas y tribológicas de una grasa grafitada de Jatropha curcas L y jabón de litio índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

GONZALEZ-CABRERA, Odonel et al. Alternative of double coating for electrode dedicated to the manual metal arc filler process. Ingeniería Mecánica [online]. 2014, vol.17, n.3, pp.245-254. ISSN 1815-5944.

The object of the present paper was to establish differences among one and twin coating electrodes dedicated to the manual filler process. The resulting relationship among the coating materials are established in 70 % of non-metallic compound and 30 % of alloy for each electrode type. For execute the work objective, two conventional procedures (immersion and extrusion) for manufacturing electrodes, as well as the influence of coating placement on the electrodes operational properties was evaluated. As result of experiment was obtained a twin coated electrode whish consume a 4,8 % less than power during the welding that one layer electrode (more economic), but with bigger quantity (27 %) of metal contributed by unit of time (bigger yield), less height of reinforcement (19,9 %) and greater depth of penetration (46,5 %).

Palabras clave : double covered electrodes; twin-coated electrodes; manual filler arc.

        · resumen en Español     · texto en Español     · Español ( pdf )