SciELO - Scientific Electronic Library Online

 
vol.18 número1Diseño de conexiones mecánicas tipo canal en vigas compuestas bajo fuegoCaracterización de la capa de boruros formada durante la austenización de un hierro nodular austemperizado índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

PEREZ-PEREZ, Daniel et al. Application of slag granulated with air in the automatic welding. Ingeniería Mecánica [online]. 2015, vol.18, n.1, pp.62-70. ISSN 1815-5944.

The objective of the present work is to evaluate the fundamentals properties of an air granulated slag and his use during the automatic submerged arc welding process, confront it to a water granulated fused flux. For it the manufacturing procedure influence of air granulated slag on its physical properties and this relation with its performance during the solder and mechanical properties of welding join obtained is considered. Is demonstrated that the characteristics of the types of evaluated grains (slag and fused flux) are different; however, this does not conduce to variations among its operating behaviors during the welding process, neither on the welding joint mechanical properties obtained; but makes to be noticeable than the granulating process of slag with air is more economic than the of granulation with water.

Palabras clave : granulating slag; dry granulation; humid granulation; welding consumable.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons