SciELO - Scientific Electronic Library Online

 
vol.18 issue2Nonlinear and chaotic behavior in a centrifugal pump operating in state of cavitationFabrication of a composite with epoxy matrix and henequen fibers as reinforcement long and with random orientation author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería Mecánica

On-line version ISSN 1815-5944

Abstract

MASIP-MACIA, Yunesky; BENGOECHEA-GARCIA, Asier  and  ORTEGA-CALDERON, Julio. Analysis of cooling an electronic component. Ingeniería Mecánica [online]. 2015, vol.18, n.2, pp.116-121. ISSN 1815-5944.

The paper presents an experimental study on the cooling of an electronic component. The cooling process was performed by the combination of a cross-flow and an impinging jet using air as coolant. The aim is the characterization of the refrigeration of an electronic cooling through the obtention of the average Nusselt number on each faceand the whole component. T he influence of the Reynolds number jet-to-channel ratio on the cooling process was determined. A wind tunnel was designed and built for the analysis and characterization of the refrigeration.

Keywords : electronic cooling; cross flow; impinging  jet.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License