SciELO - Scientific Electronic Library Online

 
vol.18 issue2Analysis of cooling an electronic componentModel to design and simulate renewables energy systems to hot water to two temperature level author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería Mecánica

On-line version ISSN 1815-5944

Abstract

RODRIGUEZ SOTO, Angel-A.; SANABIO-ALVES-BORGES, Lavinia-Maria; VALIN-RIVERA, José-Luís  and  DIAZ BATISTA, Daniel. Fabrication of a composite with epoxy matrix and henequen fibers as reinforcement long and with random orientation. Ingeniería Mecánica [online]. 2015, vol.18, n.2, pp.122-128. ISSN 1815-5944.

Is presented a procedure for the fabrication of the composite material with epoxy as matrix reinforced with henequen fibers, long and random. Was designed and fabricated six molds of box type for the manufacture of the plates using cold pressing procedure. Was make 37 plates with 0, 6, 9, 12, 16, 22, 26 and 28 % of fiber´s inclusions in mass relation. The inclusion of the reinforcements was making manually and the obtained materials was submitted to a process of cure bellow 70ºC during 24 hours. The obtained specimens showed a good quality being free of defects and guarantee the correct distribution of the fibers. The fabrication method is de adequate for plates with small and large quantities of fiber.

Keywords : fiber reinforced plastics (FRP); natural fibers; composite with thermoset matrix; cold compression molded.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License