SciELO - Scientific Electronic Library Online

 
vol.18 número2Análisis de la refrigeración de un componente electrónicoModelo para diseñar y simular sistemas renovables de energía para calentar agua a dos niveles de temperatura índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

RODRIGUEZ SOTO, Angel-A.; SANABIO-ALVES-BORGES, Lavinia-Maria; VALIN-RIVERA, José-Luís  y  DIAZ BATISTA, Daniel. Fabrication of a composite with epoxy matrix and henequen fibers as reinforcement long and with random orientation. Ingeniería Mecánica [online]. 2015, vol.18, n.2, pp.122-128. ISSN 1815-5944.

Is presented a procedure for the fabrication of the composite material with epoxy as matrix reinforced with henequen fibers, long and random. Was designed and fabricated six molds of box type for the manufacture of the plates using cold pressing procedure. Was make 37 plates with 0, 6, 9, 12, 16, 22, 26 and 28 % of fiber´s inclusions in mass relation. The inclusion of the reinforcements was making manually and the obtained materials was submitted to a process of cure bellow 70ºC during 24 hours. The obtained specimens showed a good quality being free of defects and guarantee the correct distribution of the fibers. The fabrication method is de adequate for plates with small and large quantities of fiber.

Palabras clave : fiber reinforced plastics (FRP); natural fibers; composite with thermoset matrix; cold compression molded.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons