SciELO - Scientific Electronic Library Online

 
vol.20 número1Pegado de láminas elastómero Nitrilo/Retamo Liso: Empleo de adhesivos ecológicos con silano y halógenoSimulación de persianas para naves industriales bajo condiciones de vientos huracanados índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

ARDILA-TELLEZ, Luis Carlos  y  HERRERA-QUINTERO, Liz Karen. Fabrication and characterisation of tungsten carbide WC-X (X=Co, Ni) obtained by powder metallurgy. Ingeniería Mecánica [online]. 2017, vol.20, n.1, pp.6-13. ISSN 1815-5944.

Powder metallurgy is a technology poorly developed in Colombia despite of worldwide success. At local level, machine tool, automotive and oil & gas sectors are the largest consumers of this kind of alloys. This article address in the PM process of ceramic-metallic materials known as CERMETS. Were successfully sintered and characterised the alloys 90WC8Co2Ni and 94WC6Ni used in oil & gas nozzle and valve seats and they were compared with commercial ones. EDS and XRD of the two alloys, laboratory and commercial, are similar; however, its microstructure and hardness differ due to manufacturing process and WC grain size. Commercial alloys have hardness 15-19 % higher than laboratory. In the commercial composition, with only nickel, defects associated to the manufacturing process were detected. Meanwhile laboratory samples not show those anomalies.

Palabras clave : powder metallurgy; hardmetal; microstructure; characterisation; grain size.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons