SciELO - Scientific Electronic Library Online

 
vol.20 número1Application of building energy simulation in the validating of operational strategies of HVAC systems on a tropical hotelValoración del procedimiento por Gas Argon en el aluminio AW5086 índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

VALIN-RIVERA, José Luis et al. Applied digital holography for evaluating hard metal chip. Ingeniería Mecánica [online]. 2017, vol.20, n.1, pp.39-44. ISSN 1815-5944.

The objective of this work is the application of an interferometric method for validating the result of wear in a cutting tool insert of hard metal. We describe in this paper the experimental setup for the application of Digital Holography technique, used with digital recording of holograms on a CCD camera. The cutting insert inspected with the optical technique was previously mounted on a support structure and slightly heated with a halogen lamp for evidence of defective regions. For image processing, the software used, ProITec. It was possible to detect, with high resolution and contactless defects that could compromise the structural integrity of the insert analyzed, no defect was found. Analysis of the images obtained, it is verified that the object is deformed as a whole, not to present any visible alteration in their pattern of fringes.

Palabras clave : digital holography; hard metal chip; holographic interferometry; unwrapping.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons