SciELO - Scientific Electronic Library Online

 
vol.20 número3Redes neuronales regularizadas aplicadas a la estimación de propiedades mecánicas de perfiles de acero índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

BOMBINO MATOS, Eugenio F.  y  PINEDA REVILLA, Edel. Simulation of biomass pneumatic drying with ascending swirling movement. Ingeniería Mecánica [online]. 2017, vol.20, n.3, pp.107-114. ISSN 1815-5944.

Considering the layer form acquired by the particles during the studying process it was necessary to define the relation cheap between the heat and mass transfer area and particles flow to simulate with more precision this kind of drying.  The simulations results were compared, by a statistical analysis based in Statgraphics-Centurion V15 program, with the results obtained in others pneumatic bagasse dryers studies and were similar and for that reason it was categorical that is correct the definition made about the relation cheap area/material flow defined in this work and it’s possible to reduce pneumatic dryer height by using this method. This reduction that can be seen by the Height Reduction Sing (HRS) of the drying column, defined in the work, will permit more compact dryers.

Palabras clave : pneumatic drying; drying in ascending swirling; biomass drying.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons