SciELO - Scientific Electronic Library Online

 
vol.22 número1Modelado matemático para la selección optima de instalaciones energéticas y su esquema de soluciónDesgaste de una herramienta cerámica BIDEMICS en el maquinado del acero AISI 316L índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Ingeniería Mecánica

versión On-line ISSN 1815-5944

Resumen

RUIZ-BARRIOS, Mario L.; HERNANDEZ-MONTERO, Fidel E.; PALOMINO-MARIN, Evelio  y  GOMEZ-MANCILLA, Julio C.. Tacho-less Automatic Gear Fault Detection. Ingeniería Mecánica [online]. 2019, vol.22, n.1, pp.32-40. ISSN 1815-5944.

In this work, a method was developed and validated toautomatically detect gear fault when the rotational speed is unknown and variable, without using a tachometer. In this method are used the synchronous fault detection based on Lock-in amplifiers (LIA) and an algorithm for automatically estimating the rotation speed. The rotation speed estimation is based on the vibration signaldecomposition into monocomponent signals and the non-quadratic phase coupling analysis.With the proposed method was possible to detect a faulty gear (with broken tooth) in the gearbox of 3 MW wind turbine. This method can be effectively applied in conditions of rotation speed variation up to 30% even for low signal-to-noise ratio (SNR).

Palabras clave : gear diagnostic; lock-in amplifier; amplitude modulation; Singular Spectrum Decomposition.

        · resumen en Español     · texto en Español     · Español ( pdf )