SciELO - Scientific Electronic Library Online

 
vol.22 suppl.1Análisis de las potencialidades de una unidad prestadora de servicios de mecanización y de asistencia técnicaLa normalización y certificación de tractores agrícolas en México índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Ciencias Técnicas Agropecuarias

versión On-line ISSN 2071-0054

Resumen

AUDELO BENITEZ, Marco Antonio et al. Performance evaluation of rollover protective structures (rops) mounted on agricultural tractors sold in Mexico. Rev Cie Téc Agr [online]. 2013, vol.22, suppl.1, pp.81-85. ISSN 2071-0054.

The crushing of tractor operators is the main risk of accident when using agricultural machines. Protection structures are an alternative to prevent suffering injury operator when a rollover is present. The objective of this work is to evaluate the performance of these structures mounted on agricultural tractors sold in Mexico. The methodology is based on the Mexican standard NMX-O-181-SCFI-2003, which is the OECD code 4. The tests were conducted in the test laboratory of the National Center of Farm Machinery Standardization (CENEMA) belonging to INIFAP. A total of 50 protection structures were tested, mounted on 107 tractor models. From these, 13 structures have been rejected because they do not meet the objective of protecting the security zone when a rollover occurs. The main cause of rejection is the invasion of the safety zone before starting with the application of loads. This means that in most cases there isn’t a resistance problem in structures, the problem is the configuration oftractor tested.

Palabras clave : test; security; accident.

        · resumen en Español     · texto en Español     · Español ( pdf )