SciELO - Scientific Electronic Library Online

 
vol.24 issue3The change of the sprinkler irrigation kit in pivots based on economic criteria for Cuba: Theoretical modelDetermination of the coefficient of reliability of exploitation in the chronometric variant and of cost for CLAAS Dominator combines author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista Ciencias Técnicas Agropecuarias

On-line version ISSN 2071-0054

Abstract

VALDES HERNANDEZ, Pedro A. et al. Determination of the technological and operation indicators of the modified forage chopper machine MF IIMA model EM-01. Rev Cie Téc Agr [online]. 2015, vol.24, n.3, pp.28-34. ISSN 2071-0054.

As part of the studies carried out by the Technical Sciences Faculty, the Agricultural Mechanization Center (CEMA) of the Havana Agricultural University (UNAH) and the Animal Science Institute (ICA), on the evaluation of the agricultural machines for the production of animal food, was developed a research with the objective to determine the technological and operation indicators of the modified forage chopper machine MF IIMA model EM-01 of Cuban production. Were determined the indicators of operation, taking in account the balance of time (clean, operative, productive, work shift, and operation), hourly productivity, hourly and specific consumption of the electric power and the coefficient of technological service, and utilization of the productive and operation time. The obtained results of the coefficient of utilization time and the productivity in exploitation time of the modified forage chopper machine MF IIMA model EM-01 is respectively of 0.41 and 0.32 t/h, being influenced fundamentally by the stops linked to the execution of the technological service of the machine (T2) and by the moves in void (T6). Of the descriptive analysis of the productivities obtained for the machine, it was obtained that the coefficient of variation doesn’t overcome 21.23%, what is considered acceptable considering the dynamics of the studied technological process. The hour and specific consumption of electric power determined experimentally for this machine was 5.62 kW/h and 17.31 kW/t respectively, being acceptable for this type of technological process, considering the given load and the power of the electric motor.

Keywords : time of operation; productivity; coefficients.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License