SciELO - Scientific Electronic Library Online

 
vol.24 número3El cambio del módulo de aspersión en pivotes según criterios económicos para Cuba: modelo teóricoDeterminación del coeficiente de fiabilidad de explotación en su variante cronométrica y de costo para cosechadoras CLAAS Dominator índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Ciencias Técnicas Agropecuarias

versión On-line ISSN 2071-0054

Resumen

VALDES HERNANDEZ, Pedro A. et al. Determination of the technological and operation indicators of the modified forage chopper machine MF IIMA model EM-01. Rev Cie Téc Agr [online]. 2015, vol.24, n.3, pp.28-34. ISSN 2071-0054.

As part of the studies carried out by the Technical Sciences Faculty, the Agricultural Mechanization Center (CEMA) of the Havana Agricultural University (UNAH) and the Animal Science Institute (ICA), on the evaluation of the agricultural machines for the production of animal food, was developed a research with the objective to determine the technological and operation indicators of the modified forage chopper machine MF IIMA model EM-01 of Cuban production. Were determined the indicators of operation, taking in account the balance of time (clean, operative, productive, work shift, and operation), hourly productivity, hourly and specific consumption of the electric power and the coefficient of technological service, and utilization of the productive and operation time. The obtained results of the coefficient of utilization time and the productivity in exploitation time of the modified forage chopper machine MF IIMA model EM-01 is respectively of 0.41 and 0.32 t/h, being influenced fundamentally by the stops linked to the execution of the technological service of the machine (T2) and by the moves in void (T6). Of the descriptive analysis of the productivities obtained for the machine, it was obtained that the coefficient of variation doesn’t overcome 21.23%, what is considered acceptable considering the dynamics of the studied technological process. The hour and specific consumption of electric power determined experimentally for this machine was 5.62 kW/h and 17.31 kW/t respectively, being acceptable for this type of technological process, considering the given load and the power of the electric motor.

Palabras clave : time of operation; productivity; coefficients.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons