SciELO - Scientific Electronic Library Online

 
vol.26 número1La velocidad del aire en el ventilador y el flujo en un pulverizador agrícolaEfectos del estrés hídrico sobre el rendimiento de los granos del frijol (Phaseolus vulgaris L.) índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Ciencias Técnicas Agropecuarias

versión On-line ISSN 2071-0054

Resumen

SANDOVAL-MENDOZA, Luis Manuel et al. Mathematical Models for Flow Simulation in Cipoletti Weirs Used in Irrigation Systems. Rev Cie Téc Agr [online]. 2017, vol.26, n.1, pp. 57-65. ISSN 2071-0054.

This paper presents the results of the research carried out at the Laboratory of Fluid Mechanics and Hydraulics of the University San Carlos de Guatemala, where different weir Cipolleti were built with different values of base (b) in the range of 5-60 centimeters. A polynomial model of second order to estimate the parameters K and n of the exponential equation to estimate the flow and potential for discharge coefficient Cd function was found. The model to estimate the theoretical flow rate suggested by the hydraulics and hydrometrics manual and the one obtained by SPSS statistical program presented the highest relative errors; however, the rest of the tested models showed a good correlation with the observed flow rates of error less than 2%. The general experimental model relating discharge coefficient obtained reliable values for all evaluated widths and load heights (H) between 4 and 10 centimeters

Palabras clave : calibration; discharge coefficient; hydrodynamic channel; flow measurement.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License