SciELO - Scientific Electronic Library Online

 
vol.28 número4Propuesta de rangos de Índice de Color según estados de maduración en frutasModelo de la interacción suelo herramienta de labranza estrecha utilizando el Método de Elementos Finitos índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Ciencias Técnicas Agropecuarias

versão On-line ISSN 2071-0054

Resumo

FLORES MORENO, Raudel et al. Evaluation of Methods to Calculate Dynamic Load Coefficients. Rev Cie Téc Agr [online]. 2019, vol.28, n.4, e03.  Epub 01-Dez-2019. ISSN 2071-0054.

Dynamic forces and impact loads usually act on agricultural machines, causing breakages or failures. That is due to the nature of the impact loads, which are of short duration and decrease the capacity of the material of absorbing the deformation energy. The calculation methods that allow obtaining dynamic load coefficients require complex operations. In the present investigation, three methodologies for obtaining dynamic load coefficients were evaluated and compared: analytical method (MA), numerical simulation by the finite element method (MEF) and experimental method (Mexp). The coefficients of dynamic loads obtained from the MEF reached a relative difference that oscillated between 3.479 and 5.112%, based on the experimental results. For the analytical method, comparedto the experimental results, a relative difference between 21.820 and 27.201% was reached, which is higher than that obtained by the numerical simulation method.

Palavras-chave : elements; dynamic efforts; Impact loads; border conditions.

        · resumo em Espanhol     · texto em Inglês | Espanhol     · Inglês ( pdf ) | Espanhol ( pdf )