SciELO - Scientific Electronic Library Online

 
vol.30 número2Diseño del sistema de riego por aspersión con bombeo eólico en el cultivo de ajo (Allium sativum L.)Balance energético en pulverizadores agrícolas índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Ciencias Técnicas Agropecuarias

versão On-line ISSN 2071-0054

Resumo

MORENO-TAMAYO, Ignacio David et al. Performance of the Centrifugal Pump of Double Suction using the Computational Fluid Dynamics Method. Rev Cie Téc Agr [online]. 2021, vol.30, n.2, e05.  Epub 01-Abr-2021. ISSN 2071-0054.

Centrifugal pumps of double suction are widely used in industrial and agricultural applications as their flow rate is twice that of single suction pumps with the same impeller diameter. The present work was carried out with the objective of simulating the performance of the double suction centrifugal pump BCP 125-420 by means of the Computational Fluid Dynamics method. For this, the methodological aspects to follow for the simulation and evaluation of the turbo machine operation were established using Computational Fluid Dynamics techniques and ANSYS Workbench software in version 14.5. All of this was done following the methodological recommendations referred in the literature related to the modeling of these devices. Among the main results, there is the value of the height predicted through the simulation and the real height of the pump, with magnitudes of 81,65 and 81,83 mwc, respectively; values that exceeded the 80 mca initially foreseen for the design and that allowed concluding that the error between the real height of the pump and the one obtained through the simulation did not exceed 1%, which indicated the reliability in performance of the BCP 125-420 double suction centrifugal pump under the operation conditions studied.

Palavras-chave : Numerical Simulation; Impeller; Cavitation; Specific Speed; Power.

        · resumo em Espanhol     · texto em Inglês | Espanhol     · Inglês ( pdf )