SciELO - Scientific Electronic Library Online

 
vol.34Influencia del ángulo de ataque del brazo de un subsolador vibratorio en las fuerzas de corte y la falla del sueloModelo de estimación hídrica para el sector agrícola y poblacional de la cuenca Tablachaca en Perú índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Ciencias Técnicas Agropecuarias

versión On-line ISSN 2071-0054

Resumen

SHKILIOVA, Liudmyla; GAIBOR-GAROFALO, Mauricio David  y  VERDEZOTO-DEL SALTO, Luis Fernando. Current Status of Agricultural Machinery in the Mechanization Centers of Bolivar Province, Ecuador. Rev Cie Téc Agr [online]. 2025, vol.34  Epub 01-Mar-2025. ISSN 2071-0054.

Agricultural mechanization plays an important role in improving productivity and sustainability in agriculture. In Ecuador, mechanization centers were implemented to facilitate access to agricultural machinery in rural areas. However, the lack of information on the current state of the equipment limits its operational efficiency. The objective of this study was to diagnose the technical condition of the agricultural machinery in the mechanization centers of Bolivar province. A total of 17 tractors, 38 power tillers and 35 agricultural implements were evaluated in 10 mechanization centers, analyzing their technical condition, safeguarding conditions, maintenance and mechanization index. The results indicate that 64.71% of the tractors are capable of working, they still show some degree of deterioration and 35.29% are inoperative. 100% of the power tillers are without working capacity. One of the main reasons for the deterioration of agricultural machinery is the lack of adequate preventive and corrective maintenance. Some elements were identified as requiring immediate attention due to their critical condition (high urgency), such as tires (12.50%), the electrical system (6.25%) and certain specific elements (21.88%). Adequate safeguards are in place for 100% of the machinery. The mechanization index varies between 0.32 and 1.1 kW/ha, with an average of 0.61 kW/ha, below the recommended standard. In conclusion, it is necessary to improve maintenance strategies, consider a machinery renewal program and strengthen operator training to ensure greater efficiency in agricultural mechanization in the province.

Palabras clave : Agricultural Mechanization; Technical Condition; Maintenance; Tractors; Productivity.

        · resumen en Español     · texto en Español | Inglés     · Español ( pdf ) | Inglés ( pdf )