SciELO - Scientific Electronic Library Online

 
vol.30 número2Nuevo sensor potenciométrico para nitrato, usando el dietiloftalato (DEP) como plastificante y el cloruro de trioctilmetilamonio (ClTOMA) como ionóforoPropuesta de una metodología para medidas de propiedades ferroeléctricas en polímeros índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

  • Não possue artigos citadosCitado por SciELO

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Cubana de Química

versão On-line ISSN 2224-5421

Resumo

DIAZ-DIAZ, Miguel Ángel; RIVAS-TRASANCOS, Lester; LEON-BARRIOS, Maydeibys  e  ACOSTA-SANCHEZ, Jessell. Absorbent material to pick up oil spills in water and soils. Rev Cub Quim [online]. 2018, vol.30, n.2, pp.289-298. ISSN 2224-5421.

The aim of this study was the pilot scale production of an absorbent material base bagasse to pick up oil spills in water and soils. For this purpose, it was prepared 30 kg of dry basis absorbent material by chemical treatment of the bagasse, which was previously dried for 72 h at room temperature, submitted to treatment with sodium hydroxide and hydrogen peroxide. The product was packed in nylon mesh bags, each one containing 10 kg of wet absorbent pads. Dynamic conditions test of the absorbent material obtained is conducted in a moving aqueous phase (hydrophilic conditions) containing hydrocarbons (oleophilic conditions), according to method ASTM F 726-12. The average sorption capacity obtained for the modified bagasse material by chemical treatment is considered acceptable, compared to some of the known commercial products.

Palavras-chave : absorbent; spills; hydrocarbons; soils; pollution.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons