SciELO - Scientific Electronic Library Online

 
vol.38 número3Identificación de riesgos en la Recapadora de Neumáticos “Ramiro Blanco Torres” de Santiago de CubaPropuesta de tratamiento para residuales de la fábrica de marmolosa en Santiago de Cuba índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Tecnología Química

versión On-line ISSN 2224-6185

Resumen

FUENTES MEDEROS, Leisy et al. Introduction and consistency of HeberFERON production in the Parenteral Products Plant 3. RTQ [online]. 2018, vol.38, n.3, pp.574-587. ISSN 2224-6185.

The National Center for Bioproducts is an installation that is mainly dedicated to the production of low-volume liquid and lyophilized parenteral products. As part of the continuous improvement process, a new parenteral product plant (PPP3) was built. The aseptic process of formulation, filling and lyophilization must be validated, since this is the way to demonstrate that a sterile product can be obtained consistently. Therefore, this work is carried out with the objective of obtaining documented evidence that all the operations are carried out according to the regulations of Good Production Practices of sterile products in the Parenteral Products Plant 3. The simulation of the productive process showed no growth of microorganisms in any of the samples incubated from the executed runs, which allowed the formulation of the production lots. Both the introductory batches and the other batches produced up to the completion of this work have had conforming results according to the established specifications. Finally, the production of HeberFERON in PPP3 obtained the manufacturing license and all the conditions are fulfilled to accomplish the planned plans.

Palabras clave : Introduction; consistency; validation; aseptic process; HeberFERON.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons