SciELO - Scientific Electronic Library Online

 
vol.44 número1Modelación de la distribución de tamaño de menas saprolíticas alimentadas al proceso CaronAnaReg_V1 asistente en MatLab para análisis de sistemas de regulación y ajuste de controladores en Instrumentación y Controles índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Tecnología Química

versión On-line ISSN 2224-6185

RTQ vol.44 no.1 Santiago de Cuba ene.-abr. 2024  Epub 31-Feb-2024

 

Artículo original

Estimación de incertidumbre para determinaciones de cobalto y hierro en muestras pareadas de NiS y NiO por regresión lineal

Uncertainty estimation for Cobalt and Iron determinations in paired samples of NiS and NiO by linear regression

0000-0002-8927-2023Armando Rojas-Vargas1  *  , 0000-0002-2014-4314Aymara Ricardo-Riverón2  , 0000-0002-9316-1545Elaine Ojeda-Armaignac3  , 0000-0003-0610-9288Nurian Serrat-Guasch3 

1Empresa de Servicios Técnicos de Computación, Comunicaciones y Electrónica del Níquel (SERCONI), Cuba

2Centro de Investigaciones del Níquel (CEDINIQ), Cuba

3Facultad de Ingeniería Química y Agronomía, Universidad de Oriente, Cuba

RESUMEN

La comparación interlaboratorio provee evidencia experimental del desempeño continuo del laboratorio para realizar pruebas específicas. En este trabajo, se determinó la incertidumbre de las mediciones y el error para los análisis químicos de cobalto y hierro en muestras pareadas de sulfuro de níquel (NiS) y óxido de níquel sinterizado (NiO), mediante mínimo-cuadrados de regresión lineal. Las determinaciones analíticas se realizaron por Espectrometría de Absorción Atómica con la participación de dos laboratorios del grupo empresarial para la producción de níquel en Cuba. Los supuestos del modelo de regresión lineal se comprobaron mediante el estadístico de Durbin-Watson, pruebas de homocedasticidad y normalidad. Se determinó la incertidumbre de la pendiente (Sm), la incertidumbre del intercepto (Sb) y la desviación estándar de la medición (Sy). Como resultado, la incertidumbre (Sx0) asociada con el valor esperado (x0) y el error (ξ) en la determinación de cobalto fue Sx0 = 0,3 % y ξ = ( 0,60 % en el Sulfuro de Níquel (NiS), y Sx0 = 0,03 % y ξ = ( 0,05 % en el Óxido de Níquel (NiO). En cuanto a la determinación de hierro, se obtuvo Sx0 = 0,16 % y ξ = ( 0,32 % en el NiS, y Sx0 = 0,05 % y ξ = ( 0,09 % en el NiO. Este método utiliza la base de datos histórica de comparación interlaboratorio y aporta información para las decisiones de gestión estratégica.

Palabras-clave: comparación interlaboratorio; regresión lineal; incertidumbre

ABSTRACT

Interlaboratory comparison provides experimental evidence on the lab continuous performance to realize specific tests. In this work, uncertainty of measurements and the interlaboratory error for the chemical analysis of cobalt and iron was determined in paired samples of nickel sulfide (NiS) and sintered nickel oxide (NiO), using the least-squares linear regression. The analytical determinations were made by Atomic Absorption Spectrometry (AAS) with the participation of two laboratories of the corporative group for the production of nickel in Cuba. The assumptions of the linear regression model were verified using the Durbin-Watson statistic, homoscedasticity and normality test. The uncertainty in the slope (Sm), in the intercept (Sb) and the standard deviation of the measurement (Sy) were determined. As a result, the uncertainty (Sx0) associated with the expected value (x0) and error (ξ) in cobalt determination was Sx0 = 0,3 % and ξ = ( 0,60 % in Nickel Sulfide (NiS), and Sx0 = 0,03 % and ξ = ( 0,05 % in Nickel Oxide (NiO). As for iron determination, it was obtained Sx0 = 0,16 % and ξ = ( 0,32 % in NiS, and Sx0 = 0,05 % and ξ = ( 0,09 % in NiO. This method uses the historic database of interlaboratory comparison and provides information to strategic management decisions.

Key words: interlaboratory comparison; lineal regression; uncertainty

Introduction

Interlaboratory comparison is a procedure to evaluate the performance of participant laboratory for specific tests against pre-established criteria. Each participant implements his routinely measurement method. This procedure is often called proficiency testing or laboratory performance studies.1,2,3,4

The study provides experimental evidence on the lab continuous performance to realize the measurements; this gives added confidence to individual staff, management and clients, and satisfies the requirements of regulatory and accreditation bodies.

The purpose of all measurement is to provide information about a quantity of interest. The outcome depends on the measuring system, the measurement procedure, sampling and sample preparation, the skill of the operator, the environment; thus, no measurement is exact.5

There are two types of measurement error quantity, systematic and random.5,6)Kadis (2008b) assumed Chumpler and Yoe´s (1940) classification of the errors as corrigible and incorrigible, both of the random and systematic components. The incorrigible error contributes to the uncertainty of the result.7,8

A systematic error remains constant or depends in a specific manner on some other quantity. In contrast, a random error provides a measured quantity value that is different from the previous value.5

Measurement uncertainty is defined as non-negative parameter characterizing the dispersion of the quantity values within which the true value of a measurand lies, based on the information used.5,7 Uncertainties associated with analytical measurements represent the doubt or level of reliability associated with the measurement.9

Comparison the interlaboratory measurements apply different protocols such as least-squares method 5,10,11) or statistical procedures as described in ISO 13528.4,12,13 On the other hand, analytical calibration for instrumental techniques and uncertainties determination based on least-squares linear regression has been presented.9,14,15,16

Interlaboratory studies in the corporate group for the nickel production in Cuba are applied as an external quality control of chemical analysis. There is a database of these controls that includes the quantitative analysis of metals such as: nickel, cobalt, iron, silicon, magnesium, in the different stages and products of the process.17 Chemical analysis measurements provide information for important decisions concerning productivity, efficiency, commerce, environmental protection, health, among others.

The purpose of this work was to determine the uncertainty in the quantitative chemical analysis of cobalt and iron, in paired solid samples of Nickel Sulfide and sintered Nickel Oxide, using the least-squares linear regression. Then, the measurements error and confidence intervals were presented. Interlaboratory measurements were made by Atomic Absorption Spectrometry.

Materials and methods

Samples and Chemical analysis

The samples of Nickel Sulfide (NiS) and sintered Nickel Oxide (NiO) come from the nickel industry in Cuba, Ammoniacal Carbonate Technology.

Chemical analysis for cobalt and iron were taken from the external control database. These analytical determinations are carried out systematically in paired samples for the interlaboratory comparison. Paired samples consist of a data set in which each data point in one sample is uniquely paired to a data point in the second sample.

The chemical analyzes were performed by Atomic Absorption Spectrophotometry in two participating laboratories, EC y RL, using a spectrophotometer “SavantAA Σ”, and “Avanta - P” respectively.

All chemicals are of analytical-reagent grade and all solutions prepared with deionised water. Nickel Sulfide (NiS) and sintered Nickel Oxide (NiO) are decomposed by mixing 0.9 g of sample with HCl (15 mL), HNO3 (10 mL) and HCLO4 (5 mL).

Measurement uncertainty

The method of least-squares was used to determine the line (1) that best fits the model and its variables the slope m and the intercept b. The independent variable x (explanatory or predictive variable) was plotted on the horizontal axis and the dependent variable y (response or predicted variable) on the vertical axis.9,14,18

The quality of fit was determined by the coefficient of determination R-squared (R2), this is the proportion of variability of y that is explained by x.

The confidence limits for the slope m and the intercept b were determined using the t-student distribution, confidence level and degrees of freedom (n-2) (2-6).14,18) Uncertainty in the measurements of y (Sy), or also called standard deviation for the lineal regression, was used in constructing confidence intervals and prediction intervals (error bars) for values of yi (7).

Where, Sm is uncertainty in the slope; Sb is uncertainty in the intercept; Uc is the combined uncertainty; Sy is Uncertainty in the measurements.

The expected value x0 (8) for a certain value y0 is expressed from the uncertainty (Sx0) associated with x0, when a single reading of y0 (9) is performed together at the confidence interval (10).

The results of previous equations are based on the following assumptions:

X- values are assumed to be "true" and free of error, and that any uncertainty in xi is negligible.

Y-values are assumed to show a Gaussian distribution, and the measurements of yi are all equally uncertain.

The residuals must be independent of each other. It is verified by means of the Durbin-Watson (DW) statistic. DW value should be in the range 1.5 to 2.5 with a P-value greater than 0.05, with a confidence level of 95.0 %.

Equality of variances (Homoscedasticity). Random error is assumed to be uniform over the range of the data, so, the variance of y is the same for each value of x. It is obtained by observing the graph of predicted values versus residuals, no association pattern should be appreciated. 16

Normality. The data from the analytical determinations that come from a normal distribution have standard skewness and kurtosis statistics within the range -2 to 2.

Statistical analysis was performed using StatGraphic Centurion XV and Microsoft Excel.

Results and discussion

The statistics summary for cobalt (Co) and iron (Fe) determinations with size sample (n) that were carried out in the CG and RL laboratories are shown in table 1. Measures of central tendency (average) and variability (standard deviation, coefficient of variation, range) are presented for two samples of dates; as for the shape measurements (standardized skewness and standardized kurtosis), these are shown for the paired samples.

Table 1 Statistical summary of cobalt and iron concentration in paired samples 

From table 1, it can be reasonably assumed that the analytical determinations of cobalt and iron in nickel sulfide (NiS) and sintered nickel oxide (NiO) come from normal distributions, according to the shape measurements between -2.0 and 2.0. All the dispersion graphics of standardized residual did not follow a pattern of association in the cloud of concentration points; therefore, the equality of variances (homoscedasticity) can also be assumed (Figures 1,2,3,4).

The residuals were independent among themselves, according to the satisfactory values of the Durbin-Watson (DW) statistic with a confidence level of 95.0 % (DW >1.5 and P >0.05) (table 2).

Fig. 1 Cobalt determination in Nickel Sulfide between laboratories CG-RL, a) Lineal model for NiS, b) Standardized residual 

Fig. 2 Cobalt determination in Nickel Oxide between laboratories CG-RL a) Lineal model for NiO, b) Standardized residual 

Fig. 3 Iron determination in Nickel Sulfide between laboratories CG-RL, a) Lineal model for NiS, b) Standardized residual 

Fig. 4 Iron determination in Nickel Oxide between laboratories CG-RL, a) Lineal model for NiO, b) Standardized residual 

The parameters of the linear models, slope m and the intercept b, were determined using Microsoft Excel. Uncertainty in the slope (Sm) and uncertainty in the intercept (Sb), the combined uncertainty (Uc), the standard deviation (Sy) of the measurements, and the confidence limits for m and b are shown in table 2.

Table 2 Parameters of linear models for nickel concentration 

The expected value of xi (UP) given a value of yi (CG) was determined by equations (8) to (10) for three values included in the cobalt and iron concentration ranges (Table 3).

Table 3 Nickel concentration xi (UP) given a value of yi (CG) 

The uncertainty (Sx0) associated with x0 and the interlaboratory error (ξ) for the chemical analysis of Nickel Sulfide (NiS) resulted (Table 3):

Cobalt: Sx0 = 0,3 % and ξ = ( 0,60 %, in the concentration range [2,8 - 11,2 %]

Iron: Sx0 = 0,16 % and ξ = ( 0,32 %, [1,05 - 3,15 %].

In regards to sinterized Nickel Oxide (NiO) resulted:

Cobalt: Sx0 = 0,03 % and ξ = ( 0,05 %, [0,56 - 1,33 %]

Iron: Sx0 = 0,05 % and ξ = ( 0,09 %, [0,30 - 0,73 %].

At a cobalt concentration in NiS of y2 = 7,01 % in the CG laboratory, an expected value of x2 = 7,05 % in the RL laboratory corresponds with an error (ξ) of 0,59 %, that is 7,05 ( 0,59 %, and the confidence interval [6,46 %; 7,64 %]. Assuming a cobalt chemical analysis of X1= 6,46 % in RL lab and fallowing ISO 13528:

As |z| ≤ 2, the performance is satisfactory.

If 2 < |z| ≤ 3 then the performance is debatable and this generate a signal of warning; else if |z| > 3 then the performance unsatisfactory and this generate a signal of action.

From figures 2 to 3, it can assume a trend that both lab have almost equal results due to the values of intercept (b ≈ 0), slope (m ≈ 1) and R2>0,98 close to 1.

Cobalt determination in NiS (figure 1) showed an intercept b = 0,087 8 witch suggest a constant systematic error between the lab, as the value of b = 0 falls within the confidence interval [-0,287; 0,112], then it is assumed that the deviation is not so important.

Regarding to iron determination in NiS between laboratories CG-RL (figure 4), there is a rotational and translational bias, m = 0,907 4 within the confidence interval [0,857; 0,958] and b = 0,098 7 [0,082; 0,116]. As m = 1 and b=0 do not fall within the interval, this suggests a general systematic error (constant and proportional).

Least-squares linear regression method facilities analyzing the historical database of external controls to obtaining a sufficiently reliable estimate of the overall uncertainty of measurements and the interlaboratory error for these chemical analysis; so, using the prior information available it can be expected less cost than experimental studies. In addition, the results contribute to strategic management decisions as it indicates the laboratory performance compared to other lab.

Nevertheless, the method does not quantify the individual components of uncertainty. When the uncertainty and the interlaboratory error are found to be unacceptable, then action must be taken to reduce the estimate. By replacing devices, carefully examining the equipment and procedures, and by sufficient training of the personnel could results on minimize or eliminate errors of measurements. However, it may be necessary to evaluate individual effects of mineralogy, particle size, sampling strategy, dilution factor, calibration function, to know which part of the measurement procedure cause the dominant contribution to the overall uncertainty, under conditions to be encountered in the routine use of the procedures such as temperature and moisture.9,19,20

Conclusions

Uncertainty of measurements (Sx0) and the interlaboratory error (ξ) for chemical analysis of cobalt and iron was determined by simple linear regression and t-distribution, resulting for the products:

Nickel Sulfide (NiS)

Cobalt, Sx0 = 0,3 % and ξ = ( 0,60 % in the concentration range [2,8 - 11,2 %]

Iron, Sx0 = 0,16 % and ξ = ( 0,32 %, [1,05 - 3,15 %].

Nickel Oxide (NiO)

Cobalt: Sx0 = 0,03 % and ξ = ( 0,05 %, [0,56 - 1,33 %];

Iron: Sx0 = 0,05 % and ξ = ( 0,09 %, [0,30 - 0,73 %].

Nomenclature

References

1.  HUND, E., MASSART, D., SMEYERS-VERBEKE, J. Inter-laboratory studies in analytical chemistry.Anal. Chim. Acta1.  ,[en línea]. 2000, 423(2), 145-165. DOI: 10.1016/s0003-2670(00)01115-6 [ Links ]

2.  HIBBERT, D. B., KORTE, E., ÖRNEMARK, U. Metrological and quality concepts in analytical chemistry (IUPAC Recommendations 2021).Pure Appl. Chem2.  . [en línea]. 2021. ISSN 1365-3075. DOI:10.1515/pac-2019-0819 [ Links ]

3.  NC ISO/IEC GUÍA 43-1/1997, IDT. Ensayos de aptitud por comparaciones interlaboratorios - parte 1: desarrollo y funcionamiento de programas de ensayos de aptitud. [ Links ]

4.  ALLARD, A., AMAROUCHE, S. Analysis of interlaboratory comparison when the measurements are not normally distributed. 18th International Congress of Metrology, 2017, 12003. DOI: 10.1051/metrology/201712003 [ Links ]

5.  JCGM 200:2008. International Vocabulary of Metrology - Basic and General Concepts and Associated Terms (VIM). 3rd Edition (Bilingual E/F). Cited by: Evaluation of measurement data - An introduction to “Guide to the expression of uncertainty in measurement” and related documents OIML G 1-104 Edition 2009 (E). [ Links ]

6.  KADIS, R.L. Measurement Uncertainty and Chemical Analysis. J. Anal. Chem.6.  [en línea]. 2008, 63(1), 95-100. ISSN 1061-9348. [ Links ]

7.  KADIS, R. Evaluation of measurement uncertainty in analytical chemistry: related concepts and some points of misinterpretation7.  . Dissertation for the commencement of the Degree of Doctor of Philosophy in Chemistry. University of Tartu, 2008. http://dspace.ut.ee/handle/10062/6720?show=full7.  [ Links ]

8.  CRUMPLER, T.B., YOE, J.H. Chemical computations and errors8.  . New York: John Wiley and Sons; London: Chapman and Hall, 1940. Ch. VII. [ Links ]

9.  QUEENIE, S.H.C. Uncertainties Related to Linear Calibration Curves: A Case Study for Flame Atomic Absorption Spectrometry. J. Braz. Chem. Soc.9.  [en línea]. 2007, 18(2). 424-430. ISSN: 1678-4790. DOI:10.1590/S0103-50532007000200027 [ Links ]

10.  BERNI, R., CAROBBI, C. Alternative statistical analysis of interlaboratory comparison measurement results. XXI IMEKO World Congress “Measurement in Research and Industry” August 30 - September 4, 2015, Prague, Czech Republic. https://www.imeko.org/publications/wc-2015/IMEKO-WC-2015-TC21-382.pdf10.  [ Links ]

11.  TELLINGHUISEN, J. Least Squares Methods for Treating Problems with Uncertainty in x and y. Anal. Chem.11.  [en línea]. 2020, 92, 10863−10871. DOI: 10.1021/acs.analchem.0c02178 [ Links ]

12.  YATKIN, S., TRZEPLA, K., HYSLOP, P., et al12.  . Comparison of a priori and interlaboratory-measurement-consensus approaches for value assignment of multi-element reference materials on PTFE filters. Microchem. J.12.  [en línea]. 2020, 158, 105225. ISSN 0026-265X. DOI: 10.1016/j.microc.2020.105225 [ Links ]

13.  ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison. [ Links ]

14.  RAWSKI, R.I., SANECKI, P.T., KIJOWSKA, K.M., et al14.  . Regression Analysis in Analytical Chemistry. Determination and Validation of Linear and Quadratic Regression Dependencies. S. Afr. J. Chem.14.  [en línea]. 2016, 69. 166-173. ISSN 0379-4350. DOI:10.17159/0379-4350/2016/v69a20 [ Links ]

15.  CHEN, H.Y.; CHEN, C. Evaluation of Calibration Equations by Using Regression Analysis: An Example of Chemical Analysis. Sensors15.  , [en línea]. 2022, 22(2), 447. ISSN 1424-8220. DOI: 10.3390/s22020447 [ Links ]

16.  RAPOSO, F. Evaluation of analytical calibration based on least-squares linear regression for instrumental techniques: A tutorial review. Trends in Analytical Chemistry16.  . [en línea]. 2016, 7. 167-185. ISSN: 0165-9936. DOI: 10.1016/j.trac.2015.12.006 [ Links ]

17.  VARGAS, A.R., NIEVES, M.E.T., DÍAZ, Y.G. Ammoniacal Carbonate Leaching: effect of dissolved sulfur in the distillation operation, Acta Chim. Slov17.  . [en línea]. 2020, 67, 1239-1249. ISSN: 1580-3155. DOI:10.17344/acsi.2020.6147 [ Links ]

18.  DEVORE, J.L. Probabilidad y Estadística para Ingeniería y Ciencias18.  . Séptima Edición. California Polytechnic State University, San Luis Obispo. 2008, 742 p. ISBN-13: 978-607-481-338-8 [ Links ]

19.  RAMSEY, M. H., ELLISON, S L R., ROSTRON, P. (eds.) Measurement uncertainty arising from sampling: a guide to methods and approaches19.  . Second Edition, Eurachem, 2019, 119 p. ISBN 978-0-948926-35-8. http://www.eurachem.org19.  [ Links ]

20.  KONIECZKA, P. The role of and the place of method validation in the Quality assurance and Quality Control (QA/QC) system. Crit. Rev. Anal. Chem.20.  [en línea]. 2007, 37(3), 173-190. ISSN: 1547-6510. DOI: 10.1080/10408340701244649 [ Links ]

Recibido: 20 de Agosto de 2023; Aprobado: 15 de Diciembre de 2023

*Corresponding author: email:arojas@eros.moa.minem.cu

The authors declare that there are not conflict of interests.

Armando Rojas-Vargas: conceptualization and design, investigation and acquisition of data, analysis and interpretation, writing and editing.

Aymara Ricardo-Riverón: investigation, acquisition of data, analysis, review.

Elaine Ojeda-Armaignac: analysis, interpretation of data and review.

Nurian Serrat-Guasch: analysis, interpretation of data and review.

The authors approved the final version for publication.

Creative Commons License