<?xml version="1.0" encoding="ISO-8859-1"?><article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<front>
<journal-meta>
<journal-id>1815-5944</journal-id>
<journal-title><![CDATA[Ingeniería Mecánica]]></journal-title>
<abbrev-journal-title><![CDATA[Ingeniería Mecánica]]></abbrev-journal-title>
<issn>1815-5944</issn>
<publisher>
<publisher-name><![CDATA[Facultad de Ingeniería Mecánica. Instituto Superior Politécnico "José Antonio Echeverría"]]></publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id>S1815-59442018000200068</article-id>
<title-group>
<article-title xml:lang="es"><![CDATA[Efecto de las correcciones de arco y pulso en la geometría de uniones de aluminio 5083 soldadas con transferencia metálica fría]]></article-title>
<article-title xml:lang="en"><![CDATA[Effect of arc and pulse corrections on the geometry of 5083 aluminum joints welded with cold metal transfer]]></article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname><![CDATA[de-Luna-Alanís]]></surname>
<given-names><![CDATA[René Eduardo]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Gómez-Pérez]]></surname>
<given-names><![CDATA[Carlos René]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
</contrib-group>
<aff id="Af1">
<institution><![CDATA[,Centro de Innovación y Desarrollo Tecnológico en Soldadura (CIDTS)  ]]></institution>
<addr-line><![CDATA[ Nuevo León]]></addr-line>
<country>México</country>
</aff>
<aff id="Af2">
<institution><![CDATA[,Universidad Central &#8220;Marta Abreu&#8221; de Las Villas Centro de Investigaciones de Soldadura (CIS) ]]></institution>
<addr-line><![CDATA[ Villa Clara]]></addr-line>
<country>Cuba</country>
</aff>
<pub-date pub-type="pub">
<day>00</day>
<month>08</month>
<year>2018</year>
</pub-date>
<pub-date pub-type="epub">
<day>00</day>
<month>08</month>
<year>2018</year>
</pub-date>
<volume>21</volume>
<numero>2</numero>
<fpage>68</fpage>
<lpage>76</lpage>
<copyright-statement/>
<copyright-year/>
<self-uri xlink:href="http://scielo.sld.cu/scielo.php?script=sci_arttext&amp;pid=S1815-59442018000200068&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://scielo.sld.cu/scielo.php?script=sci_abstract&amp;pid=S1815-59442018000200068&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://scielo.sld.cu/scielo.php?script=sci_pdf&amp;pid=S1815-59442018000200068&amp;lng=en&amp;nrm=iso"></self-uri><abstract abstract-type="short" xml:lang="es"><p><![CDATA[Resumen Las correcciones de arco y de pulso del proceso de soldadura con transferencia metálica fría modifican el voltaje y la corriente. El efecto de su combinación no se ha estudiado suficientemente sobre la geometría de la unión. El objetivo del presente trabajo es determinar el efecto de las correcciones de arco y de pulso y de la velocidad de soldadura del proceso con transferencia metálica fría sobre las geometrías de las uniones realizadas en aluminio 5083.Para ello, se realiza un diseño experimental, con tres factores independientes a dos niveles, empleando los parámetros geométricos de las uniones como factores independientes. La función corrección del puso influye directamente sobre la altura y la profundidad, mientras que la función corrección de la longitud de arco influye inversamente. Ambas funciones no manifiestan influencia significativa sobre el ancho del cordón. La velocidad de soldadura influye inversamente sobre la altura, el ancho y la profundidad de los cordones de soldadura.]]></p></abstract>
<abstract abstract-type="short" xml:lang="en"><p><![CDATA[Abstract The arc and pulse corrections of the cold metal transfer welding process modify the voltage and current. The effect of their combination has not been sufficiently studied on the joint geometry. The objective of the present work is to determinate the effect of the arc and pulse corrections and the welding speed of the cold metal transfer welding process on the 5083 aluminum joints geometries. For this, an experimental design is made, with three independent factors at two levels, using the geometric parameters of the unions as independent factors. The correction pulse function directly acts on the height and depth, while than the arc length correction function has inversely influence. Both functions do not manifest significant influence on the welding width. The welding speed inversely acts on the height, the width and the depth of the welding joint.]]></p></abstract>
<kwd-group>
<kwd lng="es"><![CDATA[corrección de arco]]></kwd>
<kwd lng="es"><![CDATA[corrección de pulso]]></kwd>
<kwd lng="es"><![CDATA[transferencia metálica fría]]></kwd>
<kwd lng="es"><![CDATA[geometría de la unión]]></kwd>
<kwd lng="en"><![CDATA[arc correction]]></kwd>
<kwd lng="en"><![CDATA[pulse correction]]></kwd>
<kwd lng="en"><![CDATA[cold metal transfer]]></kwd>
<kwd lng="en"><![CDATA[joint geometry]]></kwd>
</kwd-group>
</article-meta>
</front><back>
<ref-list>
<ref id="B1">
<label>1</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Azar]]></surname>
<given-names><![CDATA[AS]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[A heat source model for cold metal transfer (CMT) welding]]></article-title>
<source><![CDATA[Therm Anal Calorim]]></source>
<year>2015</year>
<volume>122</volume>
<numero>2</numero>
<issue>2</issue>
<page-range>6-17</page-range></nlm-citation>
</ref>
<ref id="B2">
<label>2</label><nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Polak]]></surname>
<given-names><![CDATA[V]]></given-names>
</name>
<name>
<surname><![CDATA[Dostal]]></surname>
<given-names><![CDATA[P]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Analysis of modern methods in welding technology of technical materials]]></article-title>
<source><![CDATA[Department of Technology and Automobile Transport FoA; Brno,]]></source>
<year>2013</year>
<publisher-loc><![CDATA[Czech Republic ]]></publisher-loc>
<publisher-name><![CDATA[Mendel University in Brno]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B3">
<label>3</label><nlm-citation citation-type="journal">
<collab>De Luna Alanís R.Gómez Pérez C</collab>
<article-title xml:lang=""><![CDATA[Las correcciones de arco y de pulso y el voltaje en la transferencia metálica fría]]></article-title>
<source><![CDATA[Ingeniería Mecánica]]></source>
<year>2016</year>
<volume>19</volume>
<numero>2</numero>
<issue>2</issue>
<page-range>94-102</page-range></nlm-citation>
</ref>
<ref id="B4">
<label>4</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Pickin]]></surname>
<given-names><![CDATA[CG]]></given-names>
</name>
<name>
<surname><![CDATA[Williams]]></surname>
<given-names><![CDATA[SW]]></given-names>
</name>
<name>
<surname><![CDATA[Lunt]]></surname>
<given-names><![CDATA[M]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Characterisation of the cold metal transfer (CMT) process and its application for low dilution cladding]]></article-title>
<source><![CDATA[Journal of MaterialsProcessingTechnology]]></source>
<year>2011</year>
<volume>211</volume>
<numero>3</numero>
<issue>3</issue>
<page-range>496-502</page-range></nlm-citation>
</ref>
<ref id="B5">
<label>5</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Talalaev]]></surname>
<given-names><![CDATA[R]]></given-names>
</name>
<name>
<surname><![CDATA[Veinthal]]></surname>
<given-names><![CDATA[R]]></given-names>
</name>
<name>
<surname><![CDATA[Laansoo]]></surname>
<given-names><![CDATA[A]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Cold metal transfer (CMT) welding of thin sheet metal products]]></article-title>
<source><![CDATA[Estonian Journal of Engineering]]></source>
<year>2012</year>
<volume>18</volume>
<numero>3</numero>
<issue>3</issue>
<page-range>243-50</page-range></nlm-citation>
</ref>
<ref id="B6">
<label>6</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Meco]]></surname>
<given-names><![CDATA[S]]></given-names>
</name>
<name>
<surname><![CDATA[Pardal Gonçalo]]></surname>
<given-names><![CDATA[E]]></given-names>
</name>
<name>
<surname><![CDATA[Alexander Quintino]]></surname>
<given-names><![CDATA[L]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Software development for prediction of the weld bead in CMT and pulsed-MAG processes]]></article-title>
<source><![CDATA[Int J Adv Manuf Technol]]></source>
<year>2013</year>
<volume>64</volume>
<page-range>171-8</page-range></nlm-citation>
</ref>
<ref id="B7">
<label>7</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Kantehm]]></surname>
<given-names><![CDATA[MS]]></given-names>
</name>
<name>
<surname><![CDATA[Marcus Krupp]]></surname>
<given-names><![CDATA[U]]></given-names>
</name>
<name>
<surname><![CDATA[Michels]]></surname>
<given-names><![CDATA[W]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Monotonic and Cyclic Deformation Behavior of MIG-CMT Welded and Heat-Treated Joints of Aluminum Cast and Wrought Alloys]]></article-title>
<source><![CDATA[Advanced Engineering Materials]]></source>
<year>2012</year>
<volume>14</volume>
<numero>10</numero>
<issue>10</issue>
<page-range>8</page-range></nlm-citation>
</ref>
<ref id="B8">
<label>8</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Taban]]></surname>
<given-names><![CDATA[E]]></given-names>
</name>
<name>
<surname><![CDATA[Kaluc]]></surname>
<given-names><![CDATA[E]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Microstructural and mechanical properties of double-sided MIG, TIG and friction stir welded 5083-H321 aluminium alloy]]></article-title>
<source><![CDATA[Kovove Mater]]></source>
<year>2006</year>
<volume>44</volume>
<numero>25</numero>
<issue>25</issue>
<page-range>25-33</page-range></nlm-citation>
</ref>
<ref id="B9">
<label>9</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Taban]]></surname>
<given-names><![CDATA[E]]></given-names>
</name>
<name>
<surname><![CDATA[Kaluc]]></surname>
<given-names><![CDATA[E]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Comparison between microstructure characteristics and joint performance of 5086-H32 aluminium alloy welded by MIG, TIG and friction stir welding processe]]></article-title>
<source><![CDATA[Kovove Mater]]></source>
<year>2007</year>
<volume>45</volume>
<numero>8</numero>
<issue>8</issue>
<page-range>241-8</page-range></nlm-citation>
</ref>
<ref id="B10">
<label>10</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Aranda]]></surname>
<given-names><![CDATA[J]]></given-names>
</name>
<name>
<surname><![CDATA[Armada]]></surname>
<given-names><![CDATA[M]]></given-names>
</name>
<name>
<surname><![CDATA[González]]></surname>
<given-names><![CDATA[P]]></given-names>
</name>
</person-group>
<source><![CDATA[Automatización para las industrias marítimas. Un estudio de la situación de España]]></source>
<year>2005</year>
</nlm-citation>
</ref>
<ref id="B11">
<label>11</label><nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Eder]]></surname>
<given-names><![CDATA[T]]></given-names>
</name>
</person-group>
<source><![CDATA[The CMT Process - News and Its Advantages in Industry, SAE]]></source>
<year>2010</year>
<publisher-loc><![CDATA[USA ]]></publisher-loc>
<publisher-name><![CDATA[SAE,Org]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B12">
<label>12</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Rykala]]></surname>
<given-names><![CDATA[J]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Robotic welding of thin wall components made of 6xxx and 2xxx series aluminium alloys using low-energy methods]]></article-title>
<source><![CDATA[Welding International]]></source>
<year>2014</year>
<volume>28</volume>
<numero>5</numero>
<issue>5</issue>
<page-range>333-8</page-range></nlm-citation>
</ref>
<ref id="B13">
<label>13</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[De Luna Alanis]]></surname>
<given-names><![CDATA[RE]]></given-names>
</name>
</person-group>
<source><![CDATA[Process and method for welding by fusion aluminium alloys by a cold metal transfer and pulsed regyme]]></source>
<year>2014</year>
<publisher-loc><![CDATA[México ]]></publisher-loc>
</nlm-citation>
</ref>
<ref id="B14">
<label>14</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Gaiani]]></surname>
<given-names><![CDATA[S]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Comparison between different arc welding technologies for titanium exhaust systems manufacturing]]></article-title>
<source><![CDATA[Titanuum 2011]]></source>
<year>2011</year>
<publisher-loc><![CDATA[San Diego, California ]]></publisher-loc>
</nlm-citation>
</ref>
</ref-list>
</back>
</article>
