<?xml version="1.0" encoding="ISO-8859-1"?><article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<front>
<journal-meta>
<journal-id>1815-5944</journal-id>
<journal-title><![CDATA[Ingeniería Mecánica]]></journal-title>
<abbrev-journal-title><![CDATA[Ingeniería Mecánica]]></abbrev-journal-title>
<issn>1815-5944</issn>
<publisher>
<publisher-name><![CDATA[Facultad de Ingeniería Mecánica. Instituto Superior Politécnico "José Antonio Echeverría"]]></publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id>S1815-59442022000100029</article-id>
<title-group>
<article-title xml:lang="es"><![CDATA[Temple del acero SAE/AISI 1045 usando aceites reutilizados como medio de enfriamiento]]></article-title>
<article-title xml:lang="en"><![CDATA[Quenching of SAE/AISI 1045 steel using reused oils as a cooling médium]]></article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Negrín-Hernández]]></surname>
<given-names><![CDATA[Luis I.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Pérez-Ruiz]]></surname>
<given-names><![CDATA[Eduardo A.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Rodríguez-Marcial]]></surname>
<given-names><![CDATA[Roberto]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Cárdenas-Olivier]]></surname>
<given-names><![CDATA[Nelson]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Duffus Scot]]></surname>
<given-names><![CDATA[Alejandro]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
</contrib-group>
<aff id="Af1">
<institution><![CDATA[,Universidad Central &#8220;Marta Abreu&#8221; de Las Villas Facultad de Ingeniería Mecánica e Industrial ]]></institution>
<addr-line><![CDATA[Villaclara ]]></addr-line>
<country>Cuba</country>
</aff>
<aff id="Af2">
<institution><![CDATA[,Universidad de Ibagué Programa de Ingeniería Mecánica ]]></institution>
<addr-line><![CDATA[Ibagué ]]></addr-line>
<country>Colombia</country>
</aff>
<aff id="Af3">
<institution><![CDATA[,Universidade Federal do Vale do Sao Francisco Colegiado de Engenharia Mecanica ]]></institution>
<addr-line><![CDATA[ ]]></addr-line>
<country>Brasil</country>
</aff>
<pub-date pub-type="pub">
<day>00</day>
<month>04</month>
<year>2022</year>
</pub-date>
<pub-date pub-type="epub">
<day>00</day>
<month>04</month>
<year>2022</year>
</pub-date>
<volume>25</volume>
<numero>1</numero>
<fpage>29</fpage>
<lpage>34</lpage>
<copyright-statement/>
<copyright-year/>
<self-uri xlink:href="http://scielo.sld.cu/scielo.php?script=sci_arttext&amp;pid=S1815-59442022000100029&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://scielo.sld.cu/scielo.php?script=sci_abstract&amp;pid=S1815-59442022000100029&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://scielo.sld.cu/scielo.php?script=sci_pdf&amp;pid=S1815-59442022000100029&amp;lng=en&amp;nrm=iso"></self-uri><abstract abstract-type="short" xml:lang="es"><p><![CDATA[Resumen En el presente trabajo se realizó el temple a probetas de acero SAE/AISI 1045 enfriándolas en sustancias no convencionales. Se realizaron tres grupos de cinco probetas cada uno, el primer grupo se enfrió en aceite vegetal desechado por el uso en la fritada de alimentos, el segundo en aceite mineral 15W40, también después de ser utilizado (5000 h) en el motor de un automóvil y el tercer grupo se enfrió en agua para tomarlo como patrón de referencia. Fue medida la dureza a estas probetas sin tratamiento, comprobándose que corresponde con lo estipulado en la literatura para este tipo de acero laminado en frío. A continuación, cada una de las probetas fue sometida a una temperatura de austenización de 840±10°C, la cual fue establecida dentro del rango de 30-60°C por encima de la curva Ac3 del diagrama Fe-Fe3C. Así mismo fue considerado un tiempo de sostenimiento a temperatura de austenización de 30±2 min. Posteriormente cada grupo de probetas se enfrió en la sustancia correspondiente. Después se realizó el análisis estructural de los diferentes grupos de probetas y se midió la dureza en las mismas. Finalmente se hizo el ensayo de desgaste abrasivo utilizando el método de arena seca-rueda de caucho establecido por la norma ASTM G 65.]]></p></abstract>
<abstract abstract-type="short" xml:lang="en"><p><![CDATA[Abstract In the present work, quenching is performed on SAE / AISI 1045 steel specimens, cooling them with non-conventional substances. Three groups of five test pieces each were made, the first group was cooled in vegetable oil discarded for use in food frying, the second in 15W40 mineral oil, also after being used (5000 h) in a car engine and the third group is cooled in water to take it as the reference standard. The hardness of these test pieces without treatment is measured, verifying that it corresponds to what is stipulated in the literature for this type of steel cold rolled. Next, each of the specimens was subjected to an austenitization temperature of 840 ± 10 ° C, which was established within the range of 30-60 ° C above the Ac3 curve of the Fe-Fe3C diagram. Likewise, a holding time at austenitization temperature of 30 ± 2 min was considered. Subsequently, each group of specimens is cooled in the corresponding substance. Afterwards, the structural analysis of the different groups of test pieces is carried out and the hardness in them is measured. Finally, the abrasive wear test is made using the rubber wheel dry sand method established by the ASTM G 65 standard.]]></p></abstract>
<kwd-group>
<kwd lng="es"><![CDATA[tratamiento térmico]]></kwd>
<kwd lng="es"><![CDATA[medio de enfriamiento]]></kwd>
<kwd lng="es"><![CDATA[aceites reutilizados]]></kwd>
<kwd lng="en"><![CDATA[heat treatment]]></kwd>
<kwd lng="en"><![CDATA[quenching media]]></kwd>
<kwd lng="en"><![CDATA[reused oils]]></kwd>
</kwd-group>
</article-meta>
</front><back>
<ref-list>
<ref id="B1">
<label>1.</label><nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Totten]]></surname>
<given-names><![CDATA[G.]]></given-names>
</name>
</person-group>
<source><![CDATA[Steel Heat Treatment]]></source>
<year>2019</year>
<publisher-loc><![CDATA[USA ]]></publisher-loc>
<publisher-name><![CDATA[CRC Press]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B2">
<label>2.</label><nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Callister]]></surname>
<given-names><![CDATA[W.]]></given-names>
</name>
</person-group>
<source><![CDATA[Materials Science and Engeneering: an Introduction]]></source>
<year>2014</year>
<publisher-loc><![CDATA[USA ]]></publisher-loc>
<publisher-name><![CDATA[John Wiley &amp; Sons]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B3">
<label>3.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Ramesh]]></surname>
<given-names><![CDATA[G]]></given-names>
</name>
<name>
<surname><![CDATA[Prabhu]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Wetting and Cooling Performance of Mineral Oils for Quench Heat Treatment of Steels]]></article-title>
<source><![CDATA[ISIJ International]]></source>
<year>2014</year>
<volume>54</volume>
<numero>6</numero>
<issue>6</issue>
<page-range>1426-35</page-range></nlm-citation>
</ref>
<ref id="B4">
<label>4.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Raygan]]></surname>
<given-names><![CDATA[S]]></given-names>
</name>
<name>
<surname><![CDATA[Rassizadehghani]]></surname>
<given-names><![CDATA[J]]></given-names>
</name>
<name>
<surname><![CDATA[Askari]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Comparison of Microstructure and Surface Properties of AISI 1045 Steel After Quenching in Hot Alkaline Salt Bath and Oil]]></article-title>
<source><![CDATA[Journal of Materials Engineering and Performance]]></source>
<year>2008</year>
</nlm-citation>
</ref>
<ref id="B5">
<label>5.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Mazuera]]></surname>
<given-names><![CDATA[D]]></given-names>
</name>
<name>
<surname><![CDATA[Ortiz]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Evaluación de los parámetros de temple y revenido para el acero AISI-SAE 1045 a escala industrial]]></article-title>
<source><![CDATA[Scientia et Técnica]]></source>
<year>2011</year>
<numero>49</numero>
<issue>49</issue>
</nlm-citation>
</ref>
<ref id="B6">
<label>6.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Abdlmanam]]></surname>
<given-names><![CDATA[S]]></given-names>
</name>
<name>
<surname><![CDATA[Elmaryami]]></surname>
<given-names><![CDATA[A]]></given-names>
</name>
<name>
<surname><![CDATA[Badrul]]></surname>
<given-names><![CDATA[O.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Modeling LHP in carbon steel 1045 during quenching]]></article-title>
<source><![CDATA[Mathematical Theory and Modeling]]></source>
<year>2012</year>
<volume>2</volume>
<numero>12</numero>
<issue>12</issue>
</nlm-citation>
</ref>
<ref id="B7">
<label>7.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Bohórquez]]></surname>
<given-names><![CDATA[C.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Influencia del tratamiento térmico desde temperaturas intercríticas en las propiedades mecánicas del acero 1045]]></article-title>
<source><![CDATA[Mecánica Computacional]]></source>
<year>2012</year>
<volume>XXXI</volume>
</nlm-citation>
</ref>
<ref id="B8">
<label>8.</label><nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Yi]]></surname>
<given-names><![CDATA[S]]></given-names>
</name>
<name>
<surname><![CDATA[Tuan]]></surname>
<given-names><![CDATA[Y]]></given-names>
</name>
</person-group>
<source><![CDATA[Assessing the Hardness of Quenched Medium Steel Using an Ultrasonic Nondestructive Method. Advances in Materials Science and Engineering]]></source>
<year>2015</year>
</nlm-citation>
</ref>
<ref id="B9">
<label>9.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Patiño]]></surname>
<given-names><![CDATA[H]]></given-names>
</name>
<name>
<surname><![CDATA[Rosero]]></surname>
<given-names><![CDATA[B.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Tratamiento térmico de temple, influencia del medio de enfriamiento]]></article-title>
<source><![CDATA[Journal de Ciencia e Ingeniería]]></source>
<year>2016</year>
<volume>8</volume>
<numero>1</numero>
<issue>1</issue>
</nlm-citation>
</ref>
<ref id="B10">
<label>10.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Garzón]]></surname>
<given-names><![CDATA[J]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Influencia en las propiedades mecánicas del acero AISI-SAE 1045 tratado térmicamente con temple a temperatura intercrítica y revenido]]></article-title>
<source><![CDATA[Revista Avances e Investigación en Ingeniería]]></source>
<year>2016</year>
<volume>13</volume>
<numero>1</numero>
<issue>1</issue>
</nlm-citation>
</ref>
<ref id="B11">
<label>11.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Pérez]]></surname>
<given-names><![CDATA[E.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Efect of machining fluid like quenching media on the friction and wear behavior of AISI 1045 steel]]></article-title>
<source><![CDATA[International Journal of Mechanical Engineering and Technology]]></source>
<year>2018</year>
<volume>9</volume>
<numero>7</numero>
<issue>7</issue>
</nlm-citation>
</ref>
<ref id="B12">
<label>12.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Pérez]]></surname>
<given-names><![CDATA[E]]></given-names>
</name>
<name>
<surname><![CDATA[Llano]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Friction and Wear Behavior of AISI 1045 Steel Quenched in Vegetable Oils]]></article-title>
<source><![CDATA[International Journal of Mechanical Engineering and Technology]]></source>
<year>2018</year>
<volume>9</volume>
<numero>7</numero>
<issue>7</issue>
<page-range>116-26</page-range></nlm-citation>
</ref>
<ref id="B13">
<label>13.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Tsun Pin]]></surname>
<given-names><![CDATA[H]]></given-names>
</name>
<name>
<surname><![CDATA[Hao En]]></surname>
<given-names><![CDATA[S]]></given-names>
</name>
<name>
<surname><![CDATA[Jao Hwa]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Temperature Modeling of AISI 1045 Steel during Surface Hardening Processes]]></article-title>
<source><![CDATA[Materials]]></source>
<year>2018</year>
<volume>11</volume>
<numero>1815</numero>
<issue>1815</issue>
</nlm-citation>
</ref>
<ref id="B14">
<label>14.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Brito]]></surname>
<given-names><![CDATA[G]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Experimental investigation of cooling behavior and residual stresses for quenching with vegetable oils at different bath temperatures]]></article-title>
<source><![CDATA[Journal of Cleaner Production]]></source>
<year>2019</year>
<volume>216</volume>
<page-range>230-8</page-range></nlm-citation>
</ref>
<ref id="B15">
<label>15.</label><nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Goncalves]]></surname>
<given-names><![CDATA[G]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Study of Microstructural Evolution and Mechanical Properties of SAE 1045 Commercial Steel subjected to Tempering Heat Treatment in Different Cooling Means]]></article-title>
<source><![CDATA[IOSR Journal of Engineering]]></source>
<year>2019</year>
<volume>09</volume>
<numero>2</numero>
<issue>2</issue>
</nlm-citation>
</ref>
<ref id="B16">
<label>16.</label><nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Maxwell]]></surname>
<given-names><![CDATA[S]]></given-names>
</name>
<name>
<surname><![CDATA[Delaney]]></surname>
<given-names><![CDATA[H]]></given-names>
</name>
<name>
<surname><![CDATA[Kelley]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
</person-group>
<source><![CDATA[Designin experiments and analyzing data]]></source>
<year>2018</year>
<publisher-name><![CDATA[Routledge Taylor and Francis Group]]></publisher-name>
</nlm-citation>
</ref>
</ref-list>
</back>
</article>
