SciELO - Scientific Electronic Library Online

 
vol.18 issue2Fabrication of a composite with epoxy matrix and henequen fibers as reinforcement long and with random orientation author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería Mecánica

On-line version ISSN 1815-5944

Abstract

MORALES-SALAS, Joel; MORENO-FIGUEREDO, Conrado  and  MARIO-PFANN, Johannes. Model to design and simulate renewables energy systems to hot water to two temperature level. Ingeniería Mecánica [online]. 2015, vol.18, n.2, pp. 129-138. ISSN 1815-5944.

For the investigation paper was carried out a model for the design and simulation of renewable energy systems to produce hot water for different temperatures of use, of low level, until 60 ºC, and medium level, until 100 ºC, in isolated zone of electric grid. The proposed model carries out simulations to different configurations of energy system to determine which the most appropriate. The final design and different simulations of two case studies for energy demand was obtained, and the results achieved are analyzed.

Keywords : model; design; simulate; renewable energy system; hot water.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License