Mi SciELO
Servicios Personalizados
Articulo
Indicadores
- Citado por SciELO
Links relacionados
- Similares en SciELO
Compartir
Ingeniería Mecánica
versión On-line ISSN 1815-5944
Resumen
RODRIGUEZ SOTO, Angel-A.; SANABIO-ALVES-BORGES, Lavinia-Maria; VALIN-RIVERA, José-Luís y DIAZ BATISTA, Daniel. Fabrication of a composite with epoxy matrix and henequen fibers as reinforcement long and with random orientation. Ingeniería Mecánica [online]. 2015, vol.18, n.2, pp. 122-128. ISSN 1815-5944.
Is presented a procedure for the fabrication of the composite material with epoxy as matrix reinforced with henequen fibers, long and random. Was designed and fabricated six molds of box type for the manufacture of the plates using cold pressing procedure. Was make 37 plates with 0, 6, 9, 12, 16, 22, 26 and 28 % of fiber´s inclusions in mass relation. The inclusion of the reinforcements was making manually and the obtained materials was submitted to a process of cure bellow 70ºC during 24 hours. The obtained specimens showed a good quality being free of defects and guarantee the correct distribution of the fibers. The fabrication method is de adequate for plates with small and large quantities of fiber.
Palabras clave : fiber reinforced plastics (FRP); natural fibers; composite with thermoset matrix; cold compression molded.