Mi SciELO
Servicios Personalizados
Articulo
Indicadores
Citado por SciELO
Links relacionados
Similares en SciELO
Compartir
Ingeniería Mecánica
versión On-line ISSN 1815-5944
Resumen
CRUZ-PEREZ, Juan Carlos; GONZALEZ-RUIZ, Jesús Eduardo; PERDOMO-GONZALEZ, Lorenzo y RODRIGUEZ-GONZALEZ, Pantaleón. Using of rice husk in the carbon steel casting parts process. Ingeniería Mecánica [online]. 2012, vol.15, n.2, pp. 115-122. ISSN 1815-5944.
Feeding auxiliary materials perform a very important role in improves technological efficiency of carbon steel casting parts process. In this article are exposing the first results in the rice husk using as an insulating material in such process. The variables sleeve thickness and covering thickness' influence were evaluated in six combinations by means of experiments. In sleeves preparation was used crushed rice husk, which was agglutinated with sodium silicate, compacted and hardened with CO2, meanwhile as covering it was uses without previous preparation. The mayor liquid steel delivering level was get employing 65 mm sleeve thickness and 85 mm covering thickness. The ASAF value generated for experimental variants was equal or inferior to 0.48.
Palabras clave : insulating sleeve; hot topping; rice husk; steel cast.