SciELO - Scientific Electronic Library Online

 
vol.30 número1Sensoramiento remoto de la salinidad en el agroecosistema Mayarí de la provincia Holguín, CubaPropiedades físico mecánicas y químicas de Allium sativum L. cultivado con diferentes concentraciones de QuitoMax® índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Ciencias Técnicas Agropecuarias

versión On-line ISSN 2071-0054

Resumen

RAMIREZ-CASTRO, Emilio  y  SHKILIOVA, Liudmyla. Technological and Operational Evaluation of Agricultural Sets in Mechanized Labors in Tobacco Tillage. Rev Cie Téc Agr [online]. 2021, vol.30, n.1  Epub 01-Ene-2021. ISSN 2071-0054.

In this investigation, the technological and exploitation indexes of the Deutz Fahr Agrofarm 420-T Ecoline agricultural tractor sets and the implements (The Checchi Magli Unitrium transplanter, a three-body cultivator subsoiler and the Jacto Coral B12 sprinkler) were determined in Tabaganesha 2 tobacco farm, Los Rios Province, Valencia City, Ecuador. The methodology was based on the chronometric observation of the times in the work of transplantation, subsoiling and fumigation of tobacco. The following technological and exploitation indices were determined: times of clean work, of assistant work and of turning work, exploitation coefficients, technical security, use of productive time and others. For the development of the methodology the NC 34-37: 2003 standards were used; also tractor and implement testing and evaluation reports as well as technical documents and scientific articles. The results of the tractor indexes with the three evaluated implements showed the following values ​​reached in the coefficients of use of productive time (K04): The tractor-transplanter set obtained 0.77, the tractor-subsoiler set reached 0, 84 and the tractor-sprinkler set reached 0.47. The maximum value of 1.00 was obtained in the technological safety coefficients (K41) and technical safety coefficients (K42) for all the evaluated sets, because none of the sets suffered any damage during the evaluation period.

Palabras clave : Technological and Operational Indexes; Chronometric; Working Time; Turning Time; Operating Ratios.

        · resumen en Español     · texto en Español | Inglés     · Inglés ( pdf )