SciELO - Scientific Electronic Library Online

 
vol.35 issue1Using constant temperature hot wire anemometer for measuring velocity ina wind tunnel author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

  • Have no cited articlesCited by SciELO

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería Electrónica, Automática y Comunicaciones

On-line version ISSN 1815-5928

Abstract

EFRAIN TELLEZ, Deivid; BARANDICA LOPEZ, Asfur; CHARRY RODRIGUEZ, Edgar  and  RAMIREZ BELTRAN, Jorge. Architecture for high accuracy HART transmitters. EAC [online]. 2014, vol.35, n.1, pp. 93-104. ISSN 1815-5928.

In this paper a novel HART transmitter architecture is presented, based on a high accuracy 4-20 mA transmitter. Its main purpose is to develop a transmitter with a digital communication protocol without negatively affecting the 4-20 mA transmitter performance. It was used in this work a high accuracy pressure transmitter (error of less than 0.1% F.S.) that requires the use of digital signal processing for the compensation and calibration process. This circuit uses a digital sensor signal processor (DSSP) and the digital communication capacity in order to acquire the needed data to meet the HART standard requirements.

Keywords : pressure transmitter; HART; piezoresistor; accuracy.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )